Professional Custom Lamp Holder Accessories Manufacturer

[2013-02-02]

E27 lamp holders, a light source lamp for E27 lamp light source interface with diameter 27MM lamp Lo Wen for screwed E27 lamps interface. Is the most common kind of lamps interface....

[2013-01-28]

E14, E27, E40, B22 (letter E on behalf of the Screw, B represents jacks figures represent the lamp cylinder diameter) lighting design basic principles apply, security, economic, aesthetic, the basic principles of the design of the lighting device. Suitable able to provide a certain number and quality of lighting, to ensure that the provisions of the illumination level to meet the need of work, learning and life. The type of lighting, illumination level, the light color changes, etc....

[2013-01-28]

E 27: E on behalf of the Screw figures after the letters representing the interface diameter size (cm). E27 is 2.7cm screw lamp is generally used in our life is E27 and B27, of course, E40, E40 majorityfor special lighting, general power Lamp with E40, such as a 1000W metal halide lamp, etc....

[2013-01-28]

Lamp holder B22: B representatives socket, a lamp light source lamp equipped for B22 lamp light source interfaces, letters, numbers represent the interface...

[2013-01-28]

E14: E on behalf of the screw, with a lamp light source lamp for E14 lamp light source interface, the letters after the numbers represent then Diameter port size (cm) E 14 is a 14mm screw lamp, lamp Lo Wen for screw-in E14 lamp interface. E14's more than the number of For decorative lighting, such as: chandeliers, crystal lamps....

[2013-01-28]

GU 10: G lamp types is a plug-in, U lamp part of a U-shaped, followed by numbers that light foot hole center Distance of 10mm, GU10 is the most common, of course, there are many other lamp, such as: GX6.35, GY9.5, GY6.5 GX16D, etc....

[2013-01-28]

Lamp holder MR16: maximum outside diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, lighting models by the letters of the alphabet...

[2013-01-27]

BAY15d/19-- means with bias positioning pins, the diameter of about 15mm, the two contact sheets (Automotive) bayonet lamp cap, its total length is approximately 19mm. K59d/80 × 63 - means with two flexible connecting member, a shell diameter of about 59mm of the lamp, the total length of the shell is about 80mm, a skirt diameter of about 63mm....

[2013-01-27]

T8 tube diameter is 8 × (1/8) x 25.4 = 25.4 mm The rest of the numbers correspond as follows: T12 diameter of 38.1 mm T10 diameter of 31.8 mm A T8 diameter of 25.4 mm T5 diameter 16 mm T4 diameter of 12.7 mm The T3.5 diameter 11.1 mm T2 diameter of 6.4 mm The lampholders specifications: E27, E40, E14...

[2013-01-27]

MR16 is the lamp holders diameter of 50mm. General default MR16 is gu5.3 the lamp holders, insert two pins. GU10 refers twisted thin hanging twisted kind of lamp holders....