Professional Custom Lamp Holder Accessories Manufacturer

[2013-02-07]

With a sound sensor, When the decibel value detected sound to the outside is greater than the set value, it will make the circuit is turned on, the lights after a period of time, the circuit is disconnected, the lamp holders turn off...

[2013-02-07]

Does the E40lamp holders and E39 lamp holders are the same? E40 refers to the diameter of the screw thread of 40mm screw base, E39 refers to the threaded hole diameter 39mm screw base....

[2013-02-04]

Bayonet lamp holder: the bayonet lamp is generally made ​​of a metal shell and the insulator is fixedly connected to the top of the metal shell, the insulator has a two-line holes...

[2013-02-04]

① location lamp. Installed in the automobile front and rear portions, indicating the existence and the body width of the traveling car. ② brake lights. Installed in the rear, drive the car to slow down or stop. ③ turn signals. Mounted on the front, rear, and side portions, said automobile steering. ④ rear fog. Installed in the rear, to improve the adverse weather conditions such as fog, snow, the rear of the car visually see status. ⑤ outline marker lamps. Mounted on the front and rear, Peugeot outer profile....

[2013-02-04]

Car lamp Holders: lamp is a specialized car. It can be divided into a variety of models, mass production according to customer demand. The company is an enterprise has many years of production experience in automotive lamp, lamp holder made of iron and nickel, stainless iron, the product standards IEC60061, long-term supply all kinds of auto lamp....

[2013-02-03]

The E26 through regulation 7006-27D-2 E26 only regulation 7006-29L-4 E26d against accidental contact gauge 7006-29A-2 E26 contact performance specifications 7006-29-2 The E26d reference diameter 23mm through regulation 7006-29B-2 The E26d reference diameter 13.2mm through regulation 7006-29C-2 The E26d reference diameter 10.4mm through regulation 7006-29D-2 Of E26d Additional regulations only 7006-27E-4...

[2013-02-03]

Lighting fixtures inside and outside design is reasonable, such as the distance between the two contacts is large enough not to cause breakdown; replacement parts (bulbs) easy to replace,...

[2013-02-02]

Copper-nickel lamp holders: one belonging to the lamp, but the material is not the same as with ordinary caps, according to the specific requirements of customers choosing different materials, of course, ceramics and other materials made ​​lamp....

[2013-02-02]

A: shopping malls, office buildings, indoor lighting, should be given to the customer and the office staff is warm, comfortable feel, suggested the use of a color temperature of 2700K (warm white) or 4200K (daylight color) intubation lights and electronic lamp is appropriate....

[2013-02-02]

(1) the hall: crystal chandeliers (where lamp replacement), downlights, rockets (2) Restaurant: ceiling lamp in energy saving lamps, downlights (3) the aisle: downlights, wall lamps (4) Room: ceiling lamps, bedside lamps, table lamps, wall lamps...