Lamp holders EP10/14 × 11 - thread crest diameter of 10mm prefocusing screw base, the total length of approximately 14mm, a skirt diameter of approximately 11mm.
B22D-3 (90 · / 135 ·) / 25 × 26 - means with the two contact piece, the diameter of about 22mm bayonet lamp cap, also carries three positioning pins, the radial distribution of angles of 90 · 135 · 135 ·; total length of about 25mm, the skirt diameter approximately 26mm.
BAY15d/19-- means with bias positioning pins, the diameter of about 15mm, the two contact sheets (Automotive) bayonet lamp cap, its total length is approximately 19mm.
K59d/80 × 63 - means with two flexible connecting member, a shell diameter of about 59mm of the lamp, the total length of the shell is about 80mm, a skirt diameter of about 63mm.
R17d/80 × 63 - (recessed double contacts lamp of the maximum transverse dimension of the positioning of the lamp in the lampholder is necessary) the insulator of about 17mm, the housing height of approximately 10mm, casing diameter of approximately 35mm.
SV8.5-8-- the shell is cone-shaped, the end of a diameter of about 8.5mm shell lamp from cones diameter 3.5mm to shell opening end measured shell length of about 8mm.
T6.8-- refers to the contacts between the outside width of about 6.8mm phone lamp.
EX10/13-- means against leakage from the screw base of the additional requirements, the crests of the thread diameter of about 10mm, with a total length of about 13mm
James supply the lamp holders, bulb holders, E27 lamp holder and GU10 lamp holder 30 years!
Copyright @2012-2016 James Lighting Ceramics & Electronic CO.,LTD
EMAIL US
SKYPE