Professional Custom Lamp Holder Accessories Manufacturer

① location lamp. Installed in the automobile front and rear portions, indicating the existence and the body width of the traveling car.

② brake lights. Installed in the rear, drive the car to slow down or stop.

③ turn signals. Mounted on the front, rear, and side portions, said automobile steering.

④ rear fog. Installed in the rear, to improve the adverse weather conditions such as fog, snow, the rear of the car visually see status.

⑤ outline marker lamps. Mounted on the front and rear, Peugeot outer profile.

⑥ parking lights. Mounted on the side portion, flag the presence of the suspended car.
Lights can clearly identify the optical signal is located in a certain distance on the other road users. The lamp parameter related luminous intensity, the light emitting area, the beam spread angle, and light color. Easy to identify the optical signal at night with dark background the semaphore used only at night, such as position lights outline marker lamps and stop lamps, the luminous intensity is usually only a few Candela to dozens of Candela. Signal light for day and night use, such as turn signals, brake lights, daytime light intensity requirements generally up to hundreds of Candela. In addition to the restrictions on the maximum luminous intensity does not produce glare when working at night in order to make this type of signal lights, and some day, night two conditions. For most close experience of automotive signal lighting must also consider the match between the light-emitting area with the provisions of luminous intensity to prevent brightness too large and cause glare. Most of the lights of the beam spread angle (the angle between the direction of the maximum light intensity of 10%), the vertical direction is not less than 20 °, the horizontal direction is not less than 40 °.
The development trend of car lights: the shape and streamlined styling consistent profiled headlamps will continue to develop low-power gas discharge lamp may become the next generation of headlamps light source; brake lights and high-contrast study and improve the high installation location rear combination lamp holders.