Professional Custom Lamp Holder Accessories Manufacturer

[2013-07-13]

The Porcelain Socket is a cost effective way to utilize a wide variety of E26 (Edison) based lamps. The simple household lamps as well as photoflood and quartz halogen bulbs. This highly versatile product has an adjustable metal mount with a 5/8" receiver for light stands and an 8mm receptacle. The Floodlight Socket tilts and locks in place at the desired angle by grasping the stay-cool wooden handle and releasing the locking knob. Lamps up to 500W won't melt the ceramic base which is impervious to heat. The socket also accepts screw-on reflectors of various sizes. porcelain socket is a common ceiling fixture for lightbulbs due to the heat-absorbing properties of the material. In a recessed lighting fixture, the porcelain socket hangs above a glass lens, typically circular or rectangular. Removing the lens provides access to the fixture for replacement. Since you will likely need a ladder to reach the fixture, recruit a helper to help hold the ladder steady while you work. Porcelain light socket is inexpensive and relatively simple. Typically found in unfinished rooms or utility areas in your home, ceramic sockets are mounted to an electrical box recessed in the wall or ceiling and secured by screws. Electrical boxes are standardized, allowing installation of a similar replacement socket or retrofitting a more decorative lighting fixture. High-heat porcelain lamp holder won't melt like plastic sockets Supports 500W bulbs maximum Wooden control handle stays cool Accepts screw-on aluminum reflectors 10' 3-prong AC power cord with inline switch Built-in adjustable umbrella mount...

[2013-07-12]

A ceramic lamp socket is a common ceiling fixture for lightbulbs due to the heat-absorbing properties of the material. In a recessed lighting fixture, the ceramic socket hangs above a glass lens, typically circular or rectangular. Removing the lens provides access to the fixture for replacement. Since you will likely need a ladder to reach the fixture, recruit a helper to help hold the ladder steady while you work. Ceramic lamp Socket is designed to replace worn-out lighting sockets. It features a standard-base design and is crafted from porcelain. The socket features a 1/4 IP hickey and is rated at 660 watts and 250 volts. Porcelain socket construction and a white finish Standard-base design 1/4 IP Hickey Rated at 660 watts and 250 volts...

[2013-07-11]

The James Ceramic Lamp Holder and Bracket Set is used to mount compact lamps into your vivarium or terrarium. The Ceramic lamp holder has an E27 fitting attached to a fixing bracket. The bracket is black and has pre made holes for easy screwing onto wood. The bracket can also be carefully stuck onto a glass terrarium. The James Compact Lamp holder is a simple 'plug and go' solution. It comes with a power cable which has a fitted plug and switch. The holder can be positioned to direct light where it is most useful.Other Items Required: Compact Fluorescent Bulbs with E27 Screw Suitable for: Most Vivariums / Terrariums Use with James or other compact UV bulbs. E27 Ceramic lamp holder factory price timely delivery material:Ceramic rate current:4A-16A rate voltage:250V-750V metal: Copper, iron, aluminum size: as your requested available wire: 0.75mm2; 0.55 mm2 contact type: Screw style, receptacle style; using:Decorate lighting and as lamps accessories...

[2013-07-11]

Ceramic lamp holder and bracket accepts any lamp with an E27 screw fitting, including the James compact reptile lamps, as well as other types such as ceramic heat lamps. The ceramic material is resistant to high UV and heat levels. Mounted in a metal bracket that fixes to the vivarium roof or wall and which can be angled to direct the focus of the lamp....

[2013-07-10]

1, City street light and high pressure sodium ballasts to determine where and how to install, and then press the lamp to the ballast and ballast distance contacts 220V power supply contacts to prepare the appropriate length from three-core cable line (distance of not more than 2 meters from the lights with cables). 2, when the lamp to the ballast contacts than 2 meters distance, you need to replace the three-core cable. Ie with a hex wrench to unscrew the lamp housing six hex bolts, pull out the lamp body parts, remove the lamp comes with three core cable, and then press the original wiring of the equipment connected three-core cable. 3, with a socket wrench to unscrew the ballast cover fastening bolts, remove the lid, the three-core cable lighting ballast output end through the introduction of devices introduce ballast cavity, the red line , black (or blue line), yellow and green lines, respectively, received ballast terminals 4,5,6, and then tighten the compression nut. 4, will be ready end of three-core power cable through the ballast input device, the introduction of ballast cavity, and then the L line (FireWire), N line (neutral), respectively, received ballasted ground the 1,2,3-bit terminals and tighten the compression nut. 5, close the ballast cover and tighten the bolts, and finally the three-core cable at the other end connected to 220V power supply proof requirements. 6, replace the lamp, first cut off the power, check the hanging chain is hung, and then turn on the lights with a hex wrench on the housing six hex bolts, carefully pull down the lamp body parts, the lamp body and porcelain lamp holder separation, unscrew the old bulb replaced with a new bulb....

[2013-07-09]

(1) Voltage: 110V-600V, Current: 4A-6A (2) Material: Copper, iron, zinc alloy, nickel plated, aluminum alloy, or according to customer's special request on material, styles (3) Other type: E10, E12, E14, E17, E40, E27 lampholder, porcelain knife switch, connector, fuse unit series etc. Usage: Lighting, lamp, decorate lighting as lamp accessories (4) Certificate: CE and RoHS....

[2013-07-09]

E26 Medium Base Lighting Socket: 5KV Pulse Rated 600 Volt Max rated 150 Watt maximum lamp wattage Leads: 16 Gage, 11" black and white Dimensions: 3" H x 2 1/4" W The EX39 mogul based size lamp sockets are used in open rated HID lighting fixtures. Lamp holder – Enclosed-fixture Mogul Base Glazed porcelain body with wireways. Copper alloy, nickel-plated center contact and lamp-grip screw shell. Stainless steel coil spring under center contact. Two leads are No.14 AWG 200° 600V glass braid SEW-2, black and white, 11“ long, stripped ½“. Two #8-32 captive mounting nuts. Lampholder is cULus listed. Material:high heat porcelain:Screw shell:Aluminum alloy or bronze or copper with nickel plated by customer's requirement ,Spec of lead wires:Standard leads are NO.18AWG,UL 1015,T105 black/white,other spec are available by customer's requirement Lampholder Rating: • 150W • 600VAC • 5KV Pulse Rated We've got the VDE CE, UL ,EK ,SAA certification for the porcelain lampholder Lampholder description: material: porcelain outer body inner component : screw shell of iron or copper . type ; screw current : 4A voltage : 250V payment term: 30% TT first and balance within 5 days before shipment . we produce lampholder of many model , such as E40 , E27 .E26 , E12 ,E39 .E14, 1) porcelain lamp holder, E40 series. 2) we can supply other products in this series 3) we can also produce it according customer's drawings 4) OEM service is also available....

[2013-07-08]

Halogen bulbs also known as tungsten halogen lamps, incandescent kind. Principle is injected into the lamp halogen such as iodine or bromine gas, at high temperature, sublimation chemical action with a halogen tungsten, tungsten sublimation re-solidified in the tungsten to form a balanced circulation, to avoid premature filament breakage. Therefore live longer than incandescent halogen bulbs. After evaporation of the tungsten atoms are moved in the direction to the glass wall, as close to the glass wall, the tungsten vapor is cooled to about 800 ℃ and halogen atoms combine to form a tungsten halide (iodide, bromide, tungsten or tungsten). Tungsten halide continues to move to the central tube, and oxidized back to the filament, as a tungsten halide is a very unstable compound and then re-heated steam into the halogen and tungsten, and the filament so that the tungsten deposited on, make up for being part evaporated. The basic principle of halogen and incandescent glow the same, are thermal radiation source. Installed halogen bulbs, choose MR16 lamp holder, turn off the power, and the use of the plastic sleeve to protect the lamp glass shell clean, do not touch, such as accidentally touched, wipe clean with alcohol....

[2013-07-08]

Energy saving lamp Mainly by the "upper cap structure" and "at the bottom of the lamp structure" component; internal structure of the binding energy package set up an electronic ballast; wherein the binding portion of the energy-saving electronic ballast space below , the addition of a spacer structure; while the lower portion is provided a combination of structural growth segment cavity structure; growth in the segment structure of the outer wall of the cavity around the ring to the majority of through holes for diverse insulation, diversion, dissipation, ensuring CFL normal life. Head of the three materials are copper lamp holder, iron lamp holder, aluminum lampholder, nickel plated lampholder (nickel-plated lamp is high quality products) Color :: green, white, black. Lamp holders according to specifications: E14, E27, E40screw lampholder,B22 Bayonet lampholder...

[2013-07-07]

Floodlight is a uniform illumination in all directions can be a point source, and its illuminated area can be adjusted in the scene appears as a regular octahedron icons. Floodlights in effect, making them the most widely used of a light source, the standard floodlights used to illuminate the entire scene. Scenario can be applied to multiple floodlights. To produce better results will shoot the light bulb into a large reflective umbrella for the proliferation of high-brightness light sources for use You can use single-ended or double-ended metal halide or high pressure sodium lamp use lamp holder E40 or RX7s mask is 5mm tempered glass, safe, high temperature, high strength, good transparency silicone rubber sealing strips to seal corrosion, sealing, waterproofing, dust application performance high pressure sodium ballast, ignitor and capacitor...