Professional Custom Lamp Holder Accessories Manufacturer

[2013-07-29]

LED is a new solid-state light source, since its inception has been a great concern. Its luminescence mechanism is by the PN junction between the electrons in the energy band transitions of light energy. Under the effect of external electric field, the radiative recombination of electrons and holes occurs electroluminescence effect, part of the energy is converted to light, radiation recombination remaining lattice vibration energy into heat. Currently LED luminous efficiency is only 20% to 30%, the rest are mostly converted into heat energy, a lot of heat to dissipate the need for timely, otherwise it will reduce the life of the LED, or even permanent failure. Therefore, the rapid development of the LED, and people are constantly engaged in research of new technology LED heat dissipation. With aluminum metal density, high thermal conductivity, surface treatment technology is mature and the advantages of LED lighting has been dominated by the main material in the market. As people on the safety performance requirements increase, the conductivity of aluminum become a deadly scar, in order to improve the safe use of LED lighting, electrical insulating materials attracted people's attention. Began to emerge of an electrically insulating material has a high thermal conductivity ceramic materials and plastics. Human use of ceramic materials has been for thousands of years, modern technology has produced ceramic insulation, high thermal conductivity, infrared radiation rate, low coefficient of expansion characteristics, can become the new material of LED lighting. At present, the ceramic material is mainly used for the LED package to the heat sink material chip, the circuit board material,ceramic lamp holder and a heat sink material lamps. By virtue of its high thermal conductivity of plastic excellent electrical insulating properties and low density value, high-profile heat sink material into the market, at this stage because the price is high, the application rate is not, and ceramic materials will have a very good advantage....

[2013-07-27]

Porcelain Lamp Holder for HID Lamps having cap dia of 26 mm. Namely 70 W / 150 W HPSV & HPMH as Well as 80 W / 125 W HPMV or CFL or LED lamps having cap diameter = 26 mm. Plastic Lamp holder E26 is made of metal and heat resistant PBT plastic (polybutylene terephthalate, (C12H12O4)n, melting point 223°C, plasticity at 125 °C). Users should ensure that correct items of appropriate voltage & wattage are used and should consult suitable qualified electrical engineer if unsure. All items below meet European electrical regulations and have CE certification....

[2013-07-26]

E40 Lamp Holder gives your Growlight the Holder it deserves! Guaranteed quality and safety, this lamp holder can be unversally fitted to a range of reflectors and designed to fit E39/40 Compact Fluorescent Lamp and High intensity Discharge Lamp.E40 ceramic lamp holder with bracket With CE and RoHS approved Material; Ceramic Body Metal material: Aluminium plated copper, Copper/ brass Contacts: Iron plated copper/ Copper/ brass/ stainless steel, Terminal: Zinc alloy/ copper/ brass...

[2013-07-26]

CFL Lamp Holder E40 with plug for hanging CFL lamps vertically. Please note CFL Lamp Holders are only for use with CFL bulbs, do not put HPS sodium or metal halide lamps in this product unless you know what you are doing and are planning to wire it into a ballast or powerpack. LED/Halogen/CFL Light Bulb Lamp Adapter E40 converted to E40 Body Meterial:flame retardant PBT Contact Meterial:Cu Weight:69g Temperature:165(°C) Rated Voltage:220-230(V) Meas:395x247x507mm Brand new and high quality High temperature resistant and anti-aging...

[2013-07-26]

Porcelain Body Lamp Holder for HID Lamps having cap dia of 39 / 40 mm. Namely 400 W i 250 W / 150 W Metal halide lamp & High pressure sodium lamp as Well as 400 W / 250 W HPMV or CFL or LED lamps having cap diameter = 39 /40 mm. The Single light E40 socket is made of ceramic and is suitable for HPS lamps and large energy-efficient lamps (Plug and Grow). The E-40 is a standard lamp socket size. The E comes from Edison and 40 is the diameter of the fitting. This is a bald fitting without wires and with a metal strip for mounting. These E40 porcelain Lamp Holders can also be used to light up 125w or 250w compact fluorescent lamps. As CFL's have integral ballasts fitted, you can simply wire a plug and an E40 socket together to supply the power to your CF lamps, great for DIY grow rooms that want to use compact fluorescent lighting...

[2013-07-24]

The porcelain Lamp Holder and Bracket Set is used to mount compact lamps into your vivarium or terrarium. The porcelain lamp holder has an E27 fitting attached to a fixing bracket. The bracket is black and has pre made holes for easy screwing onto wood. The bracket can also be carefully stuck onto a glass terrarium. The Arcadia Compact Lamp holder is a simple 'plug and go' solution. It comes with a power cable which has a fitted plug and switch. The holder can be positioned to direct light where it is most useful.Other Items Required: Compact Fluorescent Bulbs with E27 lamp holder. Because the use of sockets is as varied as that of electric lighting, we offer a broad range of socket types, both standard and specialized. Among these are Bakelite, brass shell, cluster, interior, paper shell, porcelain, weather proofed, and bayonet double contact sockets. Our Bakelite series includes, among other types, E26 lamp holder that are ideal for converting older lamps as well as candelabra base sockets. Because preferences differ when it comes to lighting controls, our brass sockets are available with non-removable keys, pull chains, push-thrus, and side knobs....

[2013-07-24]

Porcelain Light sockets are the part of a lamp or light fixture that transfer electricity to a bulb. They are generally controlled by a string, chain, knob, or, in the case of most fixtures, a wall switch. Sockets are produced as both single and clustered units as well as with rings or other fittings that allow them to be used with special shells or coverings. The conversion of a gas lamp to one that runs on electric power usually involves the replacement of a burner with a socket. James lamp holder is one of the largest suppliers of lamp sockets and lighting sockets in China. We have been selling lamp sockets since they were first made and used to convert gas lighting to electric just after the turn of the century. We carry a full line of porcelain lamp holder, halogen lamp sockets, edison lamp sockets, E26 lamp holder,E40 lamp holder, intermediate lamp sockets, socket adapters, mogul sockets and replacement light sockets for almost any lamp. If you dont see the lamp socket or lighting socket that you need give us a call....

[2013-07-23]

E14, E27, E12, E26 lamp holder, etc. usually beginning with E: Screw lamp holder,GU10 GU such means as the beginning of our daily use of the bayonet lamp holder, GU: G indicates lamp holder type is plug, U represents a U-shaped lamp holder part , behind the numbers that light foot hole center distance (in millimeters "MM"). MR16, MR11 to the beginning of the line MR local lighting spotlights used this small lamp, spot light has two blades usually easy to install. MR16, Gu10 lamp holder is everyone's different, PAR30, 38 are of different diameters, are the world through a standard and it is called, are light cup, spot called, each suitable for different ceiling lampholder. MR16 in the lighting industry refers to the maximum diameter of 2 inches with a multi-faceted reflector lamps, MP11 is smaller than MR16 lamps. MRMR: Multiface Reflect, multi-faceted reflector (light cup), followed by numbers that light cup diameter (in units of 1/8 inch), MR16 caliber = 16 × 1/8 = 2 inch ≈ 50mm PAR lamps are generally PAR30 PAR36 PAR46 PAR56, volume may be long or short, also called downlight, the illuminating beam is used to illuminate the stage, dynamic color changing, etc., is a common fixture on the stage, because power consumption is relatively large, and there is a feeling of grilled, LED PAR lamp is now gradually being replaced by AR111/AR70 is cold aluminum reflector halogen spotlights E27, E14 refers to the ordinary screw cap of the lamp size, E27 is what we usually use incandescent lamp, E14 is better than its smaller size, larger than the E27 also there E40 lamp holder. G12 is a single-ended metal halide lamp of the tubular....

[2013-07-23]

MR16 lamp holder (sometimes referred to as MR-16) is established by a number of manufacturers of standard halogen reflector lamps. MR16 type LED lamp current can also be seen. MR16 is a naming numbers, where "MR" represent multiple reflector. 16 represents the length of the diameter before, the number of multiple unit length, required 8 units of 1 inch. In MR16 example, the first diameter is 16 units long, the front is 2 inches in diameter, that 2x2.54cm = 5.08cm, diameter of about 5 cm long. Light socket adapters are utilized to either extend, enlarge or reduce your current lamp socket to another size. Utilize these lamp socket adapters to best fit your current home or office fixtures to meet your needs - without having to purchase a new fixture. MR16 in the lighting industry refers to the maximum diameter of 2 inches with a multi-faceted reflector lamps, MP11 is smaller than MR16 lamps PAR lamps are generally PAR30 PAR36 PAR46 PAR56, the volume may be long or short, also called lamp, irradiation beam , used to illuminate the stage, dynamic color changing, etc., is a common fixture on the stage, because power consumption is relatively large, and there are grilled feeling, LED PAR lamp is now gradually being replaced by AR111/AR70 is cold aluminum reflector halogen spotlights E27. E14 refers to the ordinary screw cap of the lamp size, E27 is what we usually use incandescent lamp, E14 is a smaller size than it is, there are more than a large E27 and E40 lamp holder. G12 is a single-ended tubular metal halide lamp PLC is designed for applications in industrial environments designed for the operation of electronic digital computing device. It can be programmed using a memory, used in its internal memory to perform logical operations, operation sequence, timing, counting and arithmetic operations such as operating instructions, and can be digital or analog inputs and outputs, control of various types of machinery or production process should be used to control the above these bulbs use, not what bulb AC220V indicates AC voltage 220 volts. GU: G indicates lamp type is plug, U represents a U-shaped porcelain lamp holder part, behind the numbers that light foot hole center distance (in millimeters "MM")....

[2013-07-22]

E27 F519-8 porcelain lamp holder, Voltage: 110V~600V 3.Current: 4A~6A Aluminum plated yellow screw shell, Iron plated copper center contact, Zinc alloy terminal block, main material:high pressure porcelain metal:iron, aluminum alloy, brass ,copper(according to customer's requirement) it uses to decorate lighting and as lamps accessories available wire:0.75mm2...