Professional Custom Lamp Holder Accessories Manufacturer

[2013-06-21]

Trip-proof metal halide lamp, a bulb and a lamp holder, bulb having a core column, bracket and the arc tube; arc tube as olive arc tube; stand the whole support frame, the stem holder, and two spring plates, with two spring is "<"-shaped sheet body, relative to the overall support frame welded; arc tube is fixedly connected by means of Nickel overall support frame of the stent, the arc tube connected in the overall coat a solid support frame against a transparent tube, a stem socket holder in the porcelain lamp holder, each of two spring ends of the upper inner wall of the bulb offset. The utility model arc lumen body shape and the shape of the arc itself consistent, and thus the arc tube temperature distribution more uniform light color temperature drift is reduced, light color consistency, reasonable structure design, frame accurate positioning when soldering pallets point significantly reduced, improve work efficiency; and in the arc tube jacket with transparent anti-tubes, can stop accidents resulting glass splash safe to use....

[2013-06-21]

Movable porcelain lamp holder and lamp for lighting factories, mines and equipment maintenance work lamps. The composition of the handle base, cover front mounted movable lamp holder, seat with bulbs, protective cover and a conductive contact pads, the film conductive connection plate, wire, three switches, electrical outlets installed in the middle of the handle seat, the rear is spare lamp compartment and into the line of holes. Solve the existing work light with only 220 volts ordinary light bulbs, light scattering, their positions without spare bulb and socket problems. With 12 or 220 volts with a dual-plug beads light bulb, concentrating adjustable beam direction, at any time and change a light bulb with the power, small size, simple to manufacture, easy to carry, easy to use advantages....

[2013-06-21]

220V voltage lighting in public places, 5A current work under civilian dual-function AC inductionswitch. By a metal sensor chip, LED indicator, casing, base composition and electronic circuits, electronic circuit board has the function selector switch, selectable timed after the lights turn off the lights, light control full voltage state and non-state or non-timed loss buck action status. The switch is characterized by a signal can be formed through the body or hand controls, when the non-timed mode, touch a hand sensor chip that is open, then touch one more time off. Can be used in public places often switch light switch can also be used in indoor lighting switch, both easy to use, and conservation of electricity, but also extend the lamp life....

[2013-06-20]

Lamp socket for lighting and medical radiation lamps. A foldable the plate holder, from the base, the support plate by injection molding, cast molding hinged together. Use in the area corresponding to the lamp, foldable, easy to carry and transport. Lamp base and plug, which lamp base with lamp socket and wire holes, plug the light bulb socket and the electrode hole, characterized by the wall of the lamp socket through a U-shaped groove wall plug socket has a corresponding ridge. Compared with the prior art, the lamp can not easily be rotated to prevent rotation of the lamp electrode due to the advantages of short-circuiting....

[2013-06-20]

Electronic ballast starter lamp base, by the shell, jack boards, electronic ballast starter circuit boards, vents, fixing screw, pin gap, pin holes, vertical isolation block, horizontal segregation block, the electrode hole, the electrodes formed. Has many advantages, firstly used for new lamps, energy saving; second is used to make the lamp light lighting; Third, the electronic ballast and lamp holder combined, combined into a whole, install fluorescent lamps no need for shade, lamp mounted directly to the wall or roof, reducing the entire cost of the lamps....

[2013-06-20]

The lamp holders can use for dual fluorescent lamp and incandescent lamp. U-shaped fluorescent lamp original thickness increased, since the holder of a circular arc portion inward opening mouth, into the incandescent lamp, two lamp circuit, heat lamp on the opening side gate. Dual fluorescent and incandescent lamp can share the same lamp socket, the fluorescent tube is damaged, the use of incandescent emergency lighting. Light Cup seat equipped with a circuit board with two resilient conductive member, the circuit board is provided with at least one light emitting element, and each end of the elastic conductive member provided on the bottom of the circuit board, and each of the elastic conductive member and the circuit board connected to each other, each the other end of the elastic conductive member piercing of the cup holder; thus, by the elastic conductive member to provide power to the porcelain lamp holder structure for lighting....

[2013-06-20]

Out-mounted fluorescent bracket, including Ming-mounted fluorescent holder body, said Ming-mounted fluorescent lamp holder body with both sides, Out-mounted fluorescent stent body with internal electrical PCB, PCB board with electrical lamp is electrically connected to a lamp holder on the lamp and the lamp mounting groove fixing grooves, the lamp and the lamp mounting groove fixing the angle between the grooves is less than 90 °, the plug cap is electrically connected to the power input, the power input plug is fixed to the mounting member , the mounting member is provided with a lamp body firmware. The model stated mounted fluorescent bracket with screws used on the building, through the Ming-mounted fluorescent lamps with a mounting bracket itself is mounted on the surface mounted fluorescent bracket, and power of the lamp body fully integrated, this installation method than traditional shrapnel installation more stable, no flashing lights, start the difficult issues, the lamp will not be from the Ming-mounted fluorescent bracket off, safe to use....

[2013-06-18]

Ceramic Halogen Lamp Holder - European GX5.3 low voltage lampholder and lead sets - Ceramic push in lampholder - Suitable for use with low voltage downlights - Available in a range of lead lengths - Silicon insulated leads are crimped to lamp holder terminations • Round Steatite body • Copper, nickel-plated double wipe contacts with stainless steel reinforcing springs • Standard lead wires are 18 AWG SEW-1 (SF1) 200°C, 12" long, stripped 1¼2" • Multi-pin base provides maximum flexibility and reduces inventory costs • Mounts using 2 screws in recessed nests through socket body • Other wire types, lengths and terminations are available upon request, contact the factory...

[2013-06-16]

Semiconductor light-emitting diode light bulbs with shade, cover, light assembly, screw lamp holder. Light-emitting module having a circuit board, are mounted on the circuit board in series with the at least two vertical light emitting diode emitting diode set, the light emitting diode in series with a resistor, the light emitting component and the negative electrode lead, respectively, and the screw lead the mouth of the bottom electrode and the cap screw cap wall connected to the electrodes, characterized in that said light emitting diode set in the number of light emitting diodes are at least two different height positions. Thus, the emission angle of light increases, the brightness uniformity, brightness enhancement, effectively overcome the shortcomings of light emitting diode way. After testing, it works reliably. Furthermore, the housing has a side wall of the screw and the negative lead on its inner screw cap connected to it with a more reliable one card line groove. Thus, by tightening screw allows the negative lead screw lamp socket to connect, its work is more reliable....

[2013-06-16]

LED light bulbs, lamps made ​​of cast molding, die, reflective dish rack, bulb holder, outer contact slices, slice die leads the series with a current limiting resistor, depending on the power of the different structures using single-or double emission LED lamps, this bulb long life, fast response, luminous flux ≥ 100Lnx, bulb uses a fixed size, without changing the composition of the existing signaling equipment components. AC and DC, DC power when in use, regardless of polarity. Light-emitting diodes with lower power consumption compared to incandescent light bulbs, and a long service life, so gradually replacing incandescent light bulbs, so the utility model utilizes the advantages of light-emitting diodes, but also through the power converter will convert alternating current mains into DC power required by light-emitting diodes, it can be applied in the original incandescent light bulbs in the LED lamp holder to accept, very convenient and practical....