Professional Custom Lamp Holder Accessories Manufacturer

[2013-12-16]

We produces leviton porcelain lamp holder for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lampholders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps. Lamp Socket Base: Medium Construction: One-Piece Mounting Type: Front Mount Circuit: Single Circuit Wattage Rating: 660 Watt Voltage: 250 volt Access: Back Wired Termination: 2-Terminal Screws Feature: Shallow Back Mounting: Mounting Clip Screw Shell Material: Copper Alloy Body Material: Unglazed Porcelain Standards and Certifications:CE/ UL/CSA Porcelain Lamp holder Features: Mounting: Mounting Clip Mounting Type: Front Mount Construction: One Piece Warranty: 1 Year Limited Available quantities: Single Package of 25 Package of 50 Package of 100...

[2013-12-16]

Suitable for GU10 type ceiling light, halogen lamp, LED bulbs, low voltage lamp and more. This GU10 lamp holder is equipped with cable wires for easy connection. 10 x GU10 Lamp Holder....

[2013-12-15]

Lamp Socket Base: Mogul Construction: One-Piece Lamp Type: HPS up to 400W Circuit: Single Circuit Access: Back Wired Wattage Rating: 1500W Voltage: 600 Volt Termination: 12-Inch 14GA SEW-2 200C Feature: 4KV-Pulse Rated Mounting: 2 8-32 Lock Nuts Screw Shell Material: Nickel-Plated Copper Alloy hell Material: Glazed Porcelain Contact Material: Nickel-Plated Copper-Alloy Color: White tandards and Certifications: UL/CSA Warranty: 1 Year Limited Availability: Distribution Mogul Porcelain HID Lamp Holder Features: Lamp Socket Base: Mogul Construction: One-Piece Lamp Type: HPS up to 400W Circuit: Single Circuit Access: Back Wired Wattage Rating: 1500W Voltage: 600 Volt Termination: 12-Inch 14GA SEW-2 200C Leads Feature: 4KV-Pulse Rated Mounting Type: 2 8-32 Lock Nuts Screw Shell Material: Nickel-Plated Copper Alloy Shell Material: Glazed Porcelain Contact Material: Nickel-Plated Copper-Alloy Color: White Standards and Certifications: UL/CSA Warranty: 1 Year Limited Available quantities: Single Package of 25 Package of 50 Package of 100...

[2013-12-15]

James produces ceramic lamp holders for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lamp holders include incandescent medium base, and specialty sizes and fluorescent lamp holders, in addition to a large line of porcelain lamp holders including pulse-rated mogul base products, and an extensive selection of devices for high intensity lamps. 660W/250V Medium Base One Piece White Urea Outlet Box Mount Incandescent Lampholder, Pull Chain, Single Circuit, Top Wired, White. lamp holder 1)fine quality,best prices 2)Ring:aluminum/brass/iron/copper 3)Bracket:iron 4)Material:porcelain,quick delivery 660W 250V Ceramic lamp holder 1) Material: porcelain 2) CE 3) Various designs available 4) Customized designs accepted 5) Safe usage, Favorable price 6) Copper / iron screw shell selectable 7) 4Ah / 250V Packing: carton...

[2013-12-13]

DC power supply Some manufacturers in order to reduce product cost, using " RC Buck " approach to power LED products , this will directly affect the life of LED products. Using a dedicated switching power supply for LED products will not affect the life of the product , but the product cost is relatively high . Anti-static measures should be done LED products in the processing and production process to the use of certain anti-static measures, such as the table to the ground , workers wear anti -static clothing, anti-static belt loop and with anti -static gloves , anti-static conditions can install the fan, while but also to ensure the workshop humidity around 65 %, so the air is too dry to produce static electricity , especially the green LED is more easily damaged by static electricity . Many people do not have static problems are due to ESD ( electrostatic discharge ) caused by consciousness , this is because most ESD damage occurred outside the person's feelings , because the perception of the human body electrostatic discharge voltage of about 3KV, and many of the electronic components in a few hundred volts will damage even when tens of volts . Usually after being damaged electronics ESD no clear boundaries , the components are mounted on the PCB after re-testing , the results of a lot of problems , the analysis is quite difficult. LED temperature...

[2013-12-11]

Aging GU10 Lamp Holder Base New Regulation Bulb Connector 240v Material: high temperature resistant ceramic Certification: CCC certification, CE, VDE, UL certification, etc Use all the LED lamps and lanterns of aging using GU10 interface. Ceramic lamp holder fitting for standard GU10 lamp Use this to fit any GU10 bulb into a hard wire system Item can use for with our LED or halogen lamps. Socket diameter: 27mm Wire Length: 9.5cm/3.7''(approx)...

[2013-12-11]

James Lighting Ceramics & Electronic produces lampholders for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lampholders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps. ampholders, commonly referred to as Sockets, are used to secure lamps in lighting fixtures and to provide a safe, reliable connection to the electrical power source. Some of them include: Stage, studio and film, interior and exterior building illumination, store displays and large areas for general illumination. Our current lampholder line is available with a variety of wire types, wire lengths, strip lengths and terminations. We offer modifications such as reflectors, mounting brackets and other hardware, upon request.Extensive line of lampholder devices offering a variety of materials for a wide range of incandescent and fluorescent applications including electrical equipment, harnesses and light strings....

[2013-12-10]

We manufacture, supply and Export Porcelain Lamp Holder which is manufactured with the best quality material and are offered as per client specifications in Fuzhou. Our products are customized as per the client specific requirements in various thicknesses, lengths and sizes. F519 E27 porcelain lampbase Normal Packaging Details: 1) 240pcs/carton 2) Carton size: 54X23X25cm 3) G.W/N.W.: 20/18kg Lampholder, Good price and after-sale service, High quality! Specification: 1) E27 lamp holder/lamp base/lampholder 2) Certificate: CE ROHS VDE 3) Material:porcelain 4) Inner metal:copper or zinc alloy or aluminum or iron or others 5) Voltage: 250V~750V 6) Electric current: 4A~16A 7) Contact type: Screw style or receptacle style Advantages: A: Difficult to aging and high temperature. B: Various style, color and sizes can be customized. C: Excellent quality, competitive price, good reputation and prompt delivery time. D: We can make different forms of packing as you need....

[2013-12-09]

E27 F519-8 Porcelain lamp holders,Cooper Wiring Porcelain Lamp holder: Lampholder fixture sockets porcelain - keyless medium base - incandescentScrew terminals are backed out. Hickeys and nipples have 1/8 inch thread for mounting on standard fixture, 0.44 inch bracket height, 1.88 inch overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs....

[2013-12-07]

Full range of high quality Edison Screw (ES) bulb holders.ES lampholder takes standard screw cap bulbs. Its porcelain construction makes it particularly suitable for high temperature environments such as light boxes and spotlights. Cable connection is via screw terminals and cable entry can be affected from the side.Rated at 4A, 250V. E27 porcelain (including 5kV models). B22 porcelain with screw terminals, E14, E27 (including 5kV models), B22 thermoplastic T210 with push-wire terminals, B22 brass 3 piece with thermoplastic insert and earth connection, Accessories: Snap-on Insulating Caps, STEAB Cable Clamps, Shade Rings, Our range includes many types of ES porcelain lamp holders including; ES (E27) SES (E14). Suitable as replacements for most applications or for new projects. Most items carry full approvals of CE and VDE and / or UL approval and all are compliant with RoHS....