Professional Custom Lamp Holder Accessories Manufacturer

[2014-03-07]

The metal and heat resistant PBT plastic (polybutylene terephthalate, (C12H12O4)n, melting point 223°C, plasticity at 125 °C). Some items utilise ceramics for certain parts. All items below meet European electrical regulations and have CE certification. Please note when ordering the male refers to the part that will be inserted into your lamp/luminaire socket and the female is referring to the part that will take the light bulb whether it be incandescent, low energy halogen, CFL compact fluorescent lights, or the latest LED/SMD bulb replacements. e.g. B22 Male to E27 Female adaptor, is to allow an Edison screw light bulb to be used in the bayonet socket of your lamp/luminaire. ADAPTOR E40 TO E27,well designed lamp socket adaptor to allow the use of ES & E27 Large Screw lamps in antique lamps fitted with with the very large E40 or GES type lampholders. This product enables you to use a wide range of the standard Edison Screw lamps which are much more readily available than the specialist GES lamps. Will work with all voltages from 110 to 240. A great solution for sympathetic restoration of Benjamin and other lamps, also very useful for replacing sodium and metal halide lamps and grow lamps, all those kind of situations!...

[2014-03-06]

A lamp socket, also known as the Edison screw fitting, is a threaded screw base used to hold and connect a light bulb to a power source. Invented by Thomas Edison and marketed in 1909, these sockets typically have right-hand threads, which allow the light bulb to be screwed in clockwise and removed counterclockwise. To deter theft in public places, the threads are sometimes reversed to prevent installation in common light fixtures. Lamps, light fixtures, and adapters are common types of fixtures that include a lamp socket. Light fixtures as well as lamps incorporate Edison screw lamp sockets into their design not only for holding and energizing the bulb but also to take advantage of the many types of bulbs on the market that use this design. Alternate designs were implemented in the early 1900s that varied from Edison's design but in the end, they fell out of use due to the practicality of the Edison screw. Light Bulb Base and lampholder Types B Bayonet Collar Base E Edison Screw Light Base F Single Pin Type Base G Multiple Pin Type Light Bulb Base K Cable Connections P Pre-focused Light Base R Recessed Contact(s) Base S Shell-type Light Bulb Base T Telephone Slide Base W Wedge Base X Special Type Lightbulb Base Lamp Number of Pin or Contacts s Single Pin d Double or Bi-Pin Base Type t Triple Pin Base or Tri-Pin Base or 3 Pin Base q Quadruple Pin Base or 4 Pin Base...

[2014-03-05]

James produces lampholders for virtually every light source equipped with incandescent, fluorescent, or CFL lamps. Lampholders include incandescent medium base, and specialty sizes & fluorescent lampholders, in addition to a large line of porcelain lampholders including pulse-rated mogul-base products, and an extensive selection of devices for high-intensity lamps. James 13357 white fluorescent lamp holder for T-8 or T-12 lights. Tall profile slide-on design with 1.17" center lamp height. Bulk packed loose with no individual packaging or instructions.James's line of linear fluorescent lampholders continues to grow with the newly introduced T8 series featuring rotary lamp-lock technology and bottom push-in wiring. Our linear fluorescent brochure details the many different mounting, wire insertion and lamp insertion configurations available. Features include: Medium Bi-Pin socket for T-8 or T-12 fluorescent lamps - G13 base Recessed wire wells completely enclose conductor, insulating against shorts Multiple terminal slots permit double connections at each contact Tall profile slide-on design - 1.17" lamp center height Quickwire termination for 18 AWG solid wire or tinned stranded wire Rated 660W 600V For use with standard 18-20 gauge panel thicknesses - fits standard 1" wide panel openings...

[2014-03-03]

The mogul base socket has a porcelain body that is gray glazed with ceramic arc shield, allowing for more heat resistance. The 14 AWG, glass braid SEW-2 lugged leads are rated for 200 degrees Celsius and 600 volts. They are 12 inches long and stripped 1/2 inch for convenient installation. The socket features a durable, nickel-plated copper alloy screw shell and bushing. It is pulse-rated, so it is ideal for use with any mogul base pulse-start metal halide bulbs. porcelain lampholder socket. Bulk packed loose with no individual packaging or instructions. Features include: Rated 1500W 600V White glazed porcelain body Copper alloy nickel-plated screw shell with lamp grips; nickel-plated bronze center contact Measurements: 2-5/32" diameter x 2-39/64" high Back wired; 2 terminal screws set deep in wire wells 2 #8-32 mounting screws on 1-3/8" centers Mogul base socket Keyless - no ON/OFF switch Single circuit...

[2014-03-03]

Medium Base to Candelabra Base reducer. Use this light bulb socket adapter to change your current E26 medium base bulb socket to an E12 candelabra base bulb socket. Utilize this new socket option to install candelabra fluorescent light bulbs. E26 Enclosed Rated HID Lighting Socket Lampholder Medium Base Porcelain Sockets 5KV Pulse Rated 600 Volt Max rated 150 Watt maximum lamp wattage Leads: 16 Gage, 11" black and white Dimensions: 3" H x 2 1/4" W The candelabra adapter is constructed with brass and bakelite, is rated 75 watts maximum and 125 volt and is 1-5/16",Longer lasting than a phenolic socket, this 1/4 IP medium base (E26) light socket is perfect for most light to medium-duty applications. It is made of commercial quality white glazed porcelain and rated for a maximum wattage of 660 watts and a maximum voltage of 250 volts. With two brass screw terminals, the installation of this socket is a cinch. Equip your lighting fixture with this medium base porcelain socket! There are four commonly used thread size groups for mains supply lamps: Candelabra: E12 North America, E11 in Europe Intermediate: E17 North America, E14 (Small ES, SES) in Europe Medium or standard: E26 (MES) in North America, E27 (ES) in Europe Mogul: E39 North America, E40 (Goliath ES) in Europe. The E26 and E27 are usually interchangeable...

[2014-02-21]

Plastic light socket or lamp holder used for low voltage circuits such as electricity experiments, educational activities and for science projects. This lamp holder features a rolled shell of brass mounted in a plastic base with two screw terminals and two pre-drilled holes for mounting on a project board. The base diameter is 29 mm and the height is 17mm. It holds our 1.2-volt, 2.25-volt, 5.1-volt and othe E10 light bulbs. It has the CE* t180 approval marking and 12 V, 2 A rating. Easy to use and allows you to keep using conventional light bulbs or compact fluorescents with This Lamp Socket. This Bulb Lamp Socket is easy and conveient for you to use or install. Feature compact and simple design, Instead of the tiny candelabra based bulb. These socket shells are thick black plastic and are typically found in less expensive lighting where the sockets are hidden by the lamp body....

[2014-02-19]

Screw-in bases, also known as Edison lamp holder and light bulb sockets are used through out the world. The conventions include terms like medium base and candelabra base. Often they are referred to with a letter-number designation that starts with an "E" followed by the number of millimeters in diameter of the base. If your base ends in a "d" this indicates a double contact base, this is typically used for 3-way bulbs. Typically North American 120VAC bases and 240VAC bases differ by only a millimeter and carry the same full name in each country. Many EagleLight bulbs support both 120VAC and 240VAC, check specifications for the bulb to determine if the bulb "E" or Edison base types, sizes and names, Range of high quality porcelain lamp bulb holders. Our range includes many types of ceramic lamp holders including; ES, B22, GU10, E40, GX5.3/GY6.35 and GU4/GX5.3. Suitable as replacements for most applications or for new projects. Most items carry full approvals of CE and VDE and / or UL approval and all are compliant with RoHS. Suitable for many applications where heat is an issue such as aquariums and vivariums. Base Number Diameter Base or Socket Name E5 5mm Lilliput Edison Screw Base E10 10mm Miniature Edison Screw Base E11 11mm Mini-Candelabra Edison Screw Base E12 12mm Candelabra Edison Screw Base E14 14mm Small Edison Screw Base (supports 240V) E17 17mm Intermediate Edison Screw Base E26 26mm Medium Edison Screw Base E27 27mm Medium Edison Screw Base (supports 240VAC) E39 39mm Mogul or Giant Edison Screw Base...

[2014-02-15]

There are two types of lamp holder, plastic and metal. They may be found as part of a table lamp, or as a part of a pendant light fitting. The method of connection is similar for both pendant type and table lamp, but the metal and plastic types require different considerations. The first difference to note is that plastic fittings have no earth connection and should therefore only be connected via a two core flex. Metal fittings must always be connected via a flex with an earth wire. The second consideration is that metal fittings are not suitable in some locations – the most notable of which is bathrooms. Plastic ones may be used in bathrooms, but choose the type with a longer plastic shroud which shields the components better. In practice, metal lampholders are generally only used for certain types of table lamps. Light Bulb Base and Socket Shape Types B Bayonet Collar Base E Edison Screw Light Base F Single Pin Type Base G Multiple Pin Type Light Bulb Base K Cable Connections P Pre-focused Light Base R Recessed Contact(s) Base S Shell-type Light Bulb Base T Telephone Slide Base W Wedge Base X Special Type Lightbulb Base Lamp Number of Pin or Contacts s Single Pin d Double or Bi-Pin Base Type t Triple Pin Base or Tri-Pin Base or 3 Pin Base q Quadruple Pin Base or 4 Pin Base...

[2014-02-14]

Porcelain light sockets are made out of an electrical insulating material that can withstand high temperatures. Electrical insulators such as Porcelain prevent heat and electricity from transferring from one metallic device to another. Replacement Porcelain light sockets are corrosion resistant and can come with a moisture gasket that makes it suitable for outside use. Porcelain light sockets are found in antique lamps, vintage lamps and lamps that use halogen light bulbs or heat bulbs. We have at our disposal purpose-oriented production equipment and many years' experience in manufacturing various types of Porcelain lamp socket and holders, such as: Porcelain lamp sockets E 14 Porcelain lamp sockets E 27 Porcelain rosettes for lighting with the lamp socket E 27 Porcelain lamp sockets E 40 Porcelain lamp sockets for fitting into household electric ovens. The bases of Porcelain lamp holder are manufactured using the procedure of wet pressing of the quartz Porcelain C111. The bases meet the dimensional and tolerance plans of the customer....

[2014-02-13]

G or Bi-pin light bulb base and sockets The "G" base type of lamp and light bulb is used to designate a "pinned" base. This can include several pin types and different numbers of pins. Designation is by letter(s)-numbers-optional letter: The first letters include "G" followed by an optional U, X, Y or Z. Next is a number that designates the number of millimeters between the center of each pin. Finally the optional final letter designates the number of pins, no letter implies 2 pins as does a d for double. Pin number designations include: s : Single, d : Double, t : Triple for 3 pins and q : Quadruple for 4 pins. Examples include: GU10 base (Ceramic lamp fitting for standard GU10 bulb Suitable for LED, CFL and Halogen Use this to fit any GU10 bulb into a hard wire system. It allows you to plug in your LED, CFL or Halogen bulb, and attach it to the normal lighting wire. Length of the Leads：About 8.5cm), G24q base type, or for T8 tubes G13 bi-pin. LED Light Bulb GU10 E26 Adapter This adapter turns a bi pin GU10 base into a standard screw in E27 base. Allows you to install a GU10 light bulb into a medium screw in socket and adds 3 4 inch in length to the overall length of the original bulb. When you insert a GU10 based bulb into this adapter extender you lengthen the bulb by 3 4 inch and convert the base to a standard Edison medium screw in base....