Professional Custom Lamp Holder Accessories Manufacturer

[2013-02-27]

LED safety Miner'slamp. The miner's lamp by the LEDlamp holder, a light source, power and connecting cables. Wherein the power supply from the battery pack core, the current limiting resistor and the encapsulation layer constituting; connecting one pole of the core with the main terminal of the battery pack...

[2013-02-27]

The bayonet and screw the lamp holders belong to the building the field of electrical equipment from the cavity cylindrical insulating housing with insulating spacers threaded on the packages in the separator side of the housing within the U-shaped metal tube, fitted on the spacerlong metal contact plate, installed in one side of the bottom of the threaded tube of the metal short-contact piece, the installation of two metal post on the other side of the spacer as the main component....

[2013-02-27]

Street LEDlamp holders, including high-efficiency power supply module, high light efficiency LED matrix light source, timing control device, and switch control device, current voltage device data interface, high-efficiency power supply module with LED matrix light source control module, LED matrix light source sequentially connected, data interface Shuntimes alternating with circadian automatic control device, the timing control apparatus....

[2013-02-27]

Lamp holders processing elastic fixture, including a jacket, the jacket core, the jacket upper portion has a threaded hole connected with the upper mold shank, a lower portion provided with radial sink hole, an upper mold pin jack jacket Central radially Shenhole and the upper die pin jack vertical intersect jacket core set folder in the radial sink hole...

[2013-02-26]

Polygonal LED lamp holders, road lighting and decorative landscape lighting is widely used in the lighting of the city's main roads and parks, squares and other public facilities.The reality of traditional light sources for high-pressure sodium lamps, power plus auxiliary power dissipation of the power supply, starter, its power consumption is very high...

[2013-02-26]

Plug-in lamp holder into the use of conversion lamp holders for Edison bulbs. Facilities, can be combined with jack lamp can be composed of the jack screw generic combination lamp. Converted a short cylindrical cross pin head and put into the socket lamp in the closed end of the existing screw lampholders screw lampholders two electrodes...

[2013-02-26]

Lamp holder converter, including the jack cap and the lower half of the upper half of the lampholders, the side wall of the lamp cap is provided with a socket on the inner wall of the external thread, the lampholder is provided with symmetrical inwardly projecting flange, lampholders the top of the jack has two electrically connected to the contacts...

[2013-02-26]

Lighting fixture converters, including the lamp holders and electronic ballasts, wherein the lamp with straight pipe adapted Block Tungsten Halogen (R7S), said base (such as GR10q GR8) with energy-saving lampsadapted, adapted to said ballast and energy saving lamps. The lamp and the lamp holders and the electronic ballasts through the plastic casing, conductive rod and lead connected to form a can straight tube tungsten halogen lamp with lamp converters convert the use of energy-saving lamps....

[2013-02-25]

Dual-bulb Gas reported miner's lamp holders block of main and auxiliary bulbs and gas newspaper. The positive power supply is connected the reported block with the main lights Terminal Block. The the positive spring leaf Terminal Block Terminal Block Vice bubble connected. Cam-type commutation negative connected to the switch spring piece close to the conductor of the switch housing and power...

[2013-02-25]

With electronic ballasts in lamp holder base, it can be demolished accept PL fluorescent bulbs. A lamp holder including a lamp housing, which has a first sidewall, a first end wall and a second end wall to form a cavity and the ballast of the lamp is mounted in the cavity....