Professional Custom Lamp Holder Accessories Manufacturer

[2013-02-25]

Gas reported miner's lamp holders, which consist primarily of the lamp shell, lamp rings, the lamp surface glass and lamp holder with bulb, said lamp shell has the the gas the reported electronic components circuit board and potentiometer, lamp shells outside the gasgas the reported electronic components circuit board through the lamp shell with built-in sensor, gas sensor cable is connected, gas reported that the electronic components on the circuit board has a socket,...

[2013-02-24]

According to the different characteristics of the light should be used lamp holders such as steel, aluminum, brass, ceramic and plastic materials, and pins of the socket of the lamp cap steel or brass, the electrical contact pads and the pins of brass or the performance of the same material should be usedmanufacturing....

[2013-02-24]

E26/24 lamp holders size: OD: 26.05mm-26.38mm total length: 23.8 ± 0.50mm,E26/25 Lamp holders dimensions: outside diameter: 26.05mm-26.38mm Total Length: 24.60 ± 0.50mm,E27 Lamp holder dimensions...

[2013-02-23]

Early UL standard E26 specifications called "Medium" (medium lampholders meaning). E26 and E27 are classified as IEC standard specifications. The lighting system of each country differ because of the different mains voltage E26 multi mains voltage 100V ~ 120V countries E27 multi-220V ~ 240V countries....

[2013-02-23]

The models of the LED lamp holder: E14, E27, E12, E26 and E at the beginning is usually the: Screw Base. GU10 GU beginning of the for our day-to-day with a bayonet GU: G lamp types is a plug-in, U lamp part of a U-shaped followed by digital light foot hole center distance (mm "mM")....

[-0001-11-30]

MR16 refers to the maximum outer diameter of 2 inches with a multi-faceted reflector lamps, MP11 MR16 smaller lamps PAR lamps generally PAR30 PAR36 PAR46 PAR56 volume long or short, also known as downlights, irradiation beam used to illuminate the stage, dynamic color changing, is common in stage lighting, because of the relatively large power consumption, and grilled feeling gradually replaced by LED PAR lamp AR111/AR70 aluminum the cold reflector halogen spotlights E27....

[2013-02-23]

MR16 refers to the maximum outer diameter of 2 inches with a multi-faceted reflector lamps, MP11 MR16 smaller lamps PAR lamps generally PAR30 PAR36 PAR46 PAR56 volume long or short, also known as downlights, irradiation beam used to illuminate the stage, dynamic color changing, is common in stage lighting, because of the relatively large power consumption, and grilled feeling gradually replaced by LED PAR lamp AR111/AR70 aluminum the cold reflector halogen spotlights E27....

[2013-02-22]

Fragrant Night: 1,To see the quality: Nightlight most critical parts in the lamp holder, when you buy the first with hand look lampshade to see if it will be very hot,...

[2013-02-22]

E27 porcelain lamp holder Shell material: ceramic Metal accessories: aluminum plated yellow, iron galvanized blue zinc-plated iron, iron-plated color, iron, nickel-plated, nickel-plated brass...

[2013-02-22]

Old-fashioned fluorescent lamps, ballasts most likely to cause a fire; modern fluorescent lamp, the inverter is the coil part, as well as the switch once the short-circuit breakdown also easy to fire! porcelain lamp holder and metal lampholder can antifire....