Professional Custom Lamp Holder Accessories Manufacturer

[2013-03-03]

E27 to GU10 PORCELAIN LAMP HOLDERS 1.250V,GU10 base lamp, E27 base holder 2.Material: PBT,Copper,Ceramic,Steady 3.CE 4.OEM...

[2013-03-03]

Porcelain lamp holders "MR" abbreviation Multifaceted Reflector means a multi-faceted reflector.16 inch unit 16 English = 2 inches = 50.8 (mm) MR11 PAR20 PAR30 lamp cup diameter common caliber, etc. G5.3 lamp pin pitch of 5.3mm, common G4 G8 G9 Previously MR16 are more for halogen bulb holders, now LED High Power MR16 porcelain lamp holders....

[2013-03-03]

The energy-saving fluorescent lamp holders, which replace the original incandescent lamp head, without having to re-prepare a new lamp, as long as accompanied by the energy-saving fluorescent tubes will be able to get the same illumination greatly energy-saving. The utility model by the lamp, ballast, and used in conjunction with the lamp socket. It can be very easy to make energy-saving fluorescent lamps head serialization Dimensions do not have to change just with different lighting lampholder type with the appropriate form of the porcelain lamp holders....

[2013-03-02]

Fluorescent lamp holders manufacturer Supply of exports of high-quality energy-saving T8 to T5 adapter to T5 switcher using PVT material, 120 degrees of heat and flame resistance, easy to operate, simple and practical, 8W, 14W, 21W, 28W, 35W T5 Lamp dedicated.use direct plug in both ends of the T5 lamp and then inserted into the original T8lamp holder. the original T8 electronic ballast replacement (while T5 ballasts). joints partial pressure tongue type (head size, height 31MM, 36MM two kinds of diameter ¢: 25MM) and ordinary (up and down the same thickness, height 20MM, 25MM two diameter ¢: 24MM) two....

[2013-03-02]

New porcelain lamp holders including the metal sleeve, the insulator, the conductive cap, and the conductive wire, the insulator including the cards connected to each other a first plastic member and a second plastic member, the metal jacket shell includes a shell body, positioning an end wall extending inwardly by the shell body, anda through hole surrounded by the end wall of the positioning...

[2013-03-01]

Modular LED street lights, including light poles, lamp mounting bracket, lamp holders and power module; one or more than one of the lamp, the lamp mounting bracket in the upper part of the light pole and through the upper part of the lamp base; setting the power module orlight pole in central or light poles the lower part of the lamp is connected via a cable and power supply module. The new technology solutions Combined LED lights,...

[2013-03-01]

High-power street LED lamp holders, including a fixture housing, lamp panel, electrical rooms panel, the translucent cover plate, the flexible LED light board, the light management device, and the LED driver control circuit, LED light board by a plurality of LED lamps housed in the LED circuit boardcomposition LED circuit board close to the inner wall of the lamp body shell...

[2013-03-01]

The structure improved the lamp holders,Solve convenient assembly, adjustment problems. Structure improved lamp, comprising a lampshade, connector, lamp holder, the switch housing and the sleeve, wherein: the lampshade side through a connecting hole; the hollow shell of the connector by two symmetrical positioning column and positioning hole card aggregate joint front end was a cylinder, the rear end of the housing set pivot hole, another housing rear end with wire perforation, and the joints are equipped with a bulb seat chamber, the upper and lower side of the bulb holders containers have card block on The side of a switch perforation, the outside of the front end of a ring groove; used for lighting....

[2013-02-28]

Fluorescent lamp holders manufacturing process of the lamp positioning means of the housing, which comprises the working of the table, under the pressure of components, the controller and the drive, the lower press assembly is provided with the compression structure, the cylinder, the piston, the rack, positioning axis;the lower end of the bench provided fixture; match of said cylinder and piston, the piston with the rack is fixed, said shaft with the rack vertical positioning....

[2013-02-27]

Alumina porcelain lamp holders having a high mechanical strength, hardness and electrical resistivity, good electrical insulating properties and excellent chemical stability. But brittle, resistant to temperature shock becomes poor. The achievements by adding nano alumina ceramic material to improve and enhance the overall performance purposes....