Professional Custom Lamp Holder Accessories Manufacturer

[2013-03-10]

Waterproof lampshade structure includes an inner cover and a housing, wherein the housing sleeve provided in the outer edge of the inner cover, and to maintain an appropriate gap between the inner edge of the inner hood accommodating a lamp and porcelain lamp holders, whereinthe lampholders may be on the inner cover and the cover was closed shape is fixed to one end of a support rod, the inner cover or cover was open shape on the other end in a watertight manner the cover provided with a transparent lid, the nacelle and convexa plurality of protrusion,...

[2013-03-10]

Holiday light strings, wires, a number of lamp and luminous body; certain luminous body fixed connection wire, the Lamp holders by perfusion package molding in the luminous body wire connection, happens to the wire at the connection of the luminous body coated lampwithin. This structure is simple, small number of parts, good sealing, suitable for outdoor use mains, applicable to a wider range, and the processing operation is simple, labor safe, high rate of qualified products, adapted to automated production....

[2013-03-10]

The color energy-saving fluorescent lamps, constituted by the fluorescent lampholders, reflector boards, lampshades, refractive board. 2-4 blocks refractive board fixed between reflective panels and lampshades, the center of the hole, so that the lamp placed within. The refractive plate may be made ​​into a variety of shapes, such as square, trapezoidal, diamond-shaped, etc., edge processed into the inclined surface, thereby generating the effect of refraction....

[2013-03-10]

Straight tube fluorescent lamps installed with a negative ion generator bracket, mainly used for indoor lighting and air purification. Straight tube structure consists of a fluorescent lamp, a bracket and the two lamp holders, said fluorescent straight tube and both ends of the bracket are mounted on the fluorescent lamp holders,...

[2013-03-09]

Automatic the contact switch street light lamp holders, belongs to an electrical lighting improvements, it also has a voice-activated, light control, continuous trigger delay function. It has a power supply circuit, a common amplifier, and an adjustable bias pulse amplifier, and a photoelectric conversion circuit, the two NOR gates, a retriggerable pulse broadening circuit, a unidirectional thyristor switch circuit and an energized delay The pulse generating circuit....

[2013-03-09]

The energy-saving and long life lampholders,that is composed of a base, capacitors, reflective cover, similar to the shape and paperback lampholders, suitable for lighting in corridors, toilets, stairs, etc.. In addition to lighting, but also both of the following five features: the middle of the night when the voltage increases, it can avoid over-voltage burned out bulb...

[2013-03-09]

T5 holder lamps Security fix sets: Tube fix sets, fix given convex head, T5 and T8 lamps convert lampholders. T5 and T8 lamps convert lampholders for conventional lighting devices. The T5 lamp holder lamp Security fix sleeve structure includes: a lamp fix sets, fix given convex head; said lamp fix sets for the U-shaped; Lamp fix sets at the bottom of the U-shaped open end material wall thickness slightly thicker than the wall thickness of the upper end of the material...

[2013-03-09]

The combined decorative lights plastic lampholders by the base surface seat, in the middle copper side of the copper sheet, flat strip of plastic mainline, which face Block after injection molded from hard plastic, one end has stairs and card holethe hollow cylinder, the base platform with the undercut, characterized in that the surface of the seat and the base card holes and barbs complexes clamped flat strip of plastic the main line is fastened....

[2013-03-08]

Low voltage halogen quartz bulbs, light color rendering property closest to the natural light and has a very good decorative effect, the bulb is fully adapted to the ordinary standard halogen lamp holders and the normal work of the existing mains voltage. The light bulb has ceramic insulation tube, matched with the lamp inside the cavity formed by the the electronic transformer assembly in the lamp with ceramic insulation tube threaded fastening connection...

[2013-03-08]

Embedded spotlight comprising: a bracket, for the spotlight is fixed to the mounting surface, in particular the ceiling of a room;porcelain lampholders to rotate or rotatably mounted in the housing, along the illumination direction of the housing through the transparent capto at least basic dustproof closed. In the embedded spotlight, the translucent cover is not connected to the lamp holders rotatable, and therefore each of the rotational position of the lampholder, the translucent cover extends parallel to the mounting surface, in particular, is flush with the mounting surface extends....