Professional Custom Lamp Holder Accessories Manufacturer

[2013-06-12]

Pluggable single spiral fluorescent tube and lamp holder. The light fixture in the longitudinal direction, reducing the use of space. Its structure including fluorescent tubes, equipped with fluorescent ballast shell lamps, lampholders, mounting bracket and reflector; inserted fluorescent tube lamp holder mounted on the lamp housing inside the body, through the wire to the ballast, reflector placed on the inside of the body shell lamps, lamp housing body mounted on a fixed surface and connected to the mounting bracket; pluggable fluorescent tube fluorescent tube, fluorescent tube that can be inserted include at least the middle of a circle around the central axis of the spiral portion of a single and ends of the connecting tube portion. The model due to the fixed lighting installed inside a single spiral fluorescent tube can be inserted so that the appearance of the lamp housing length size can be made ​​more compact, expanding the awareness of the use of fluorescent, especially with the use of the courtyard and road lighting and other outdoor environments to promote the use....

[2013-06-10]

Special lighting and commercial lighting xenon metal halide lamp. The single-ended Xenon Xenon metal halide lamp includes a single-ended metal halide bulbs and wool caps and lamp holders constitute, using xenon metal halide bulb is filled with high gross xenon distance between the electrodes is less than 5mm ultra-compact, high efficiency instantaneous xenon metal halide lights. The single-ended lamp holder are made of high insulation material such as ceramic. The utility model lamps are energy efficient features, small volume than conventional metal halide lamp, a few seconds after the ignition can be achieved within the rated brightness, stable, long life, color rendering index than common metal halide high. To such a point light source close to the typical, easy to design lamps and obtain the desired ideal focused beam, used in a variety of lighting requirements very special occasions....

[2013-06-10]

COA (Chip On Aluminum) LED lighting technology in its printed on one side of the aluminum substrate a conductive line, while the insulating paint sprayed on the printed surface of a conductive wire and an insulating layer of paint sprayed on the surface provided with at least a light cup, the cup at the edge of each lamp corresponding set two copper electrodes, and then the LED chip fixed to the lamp holder, direct wire connection between the chips and the rest of the LED chip pin and two bronze respectively electrode is electrically connected, and finally between the LED chip and chip solder tails with fluorescent plastic and resin encapsulation. The aluminum substrate of the invention, both as light board and as a heat sink, the LED chip and lamp combination greatly simplify its structure, cooling effect, making simple, especially useful in high-power LED lights, and the line sealing, insulation well, increasing the light board security, stability and reliability....

[2013-06-09]

Lamp holder converters, including two jack deck, the deck is provided with an externally threaded wall lamp, head of the male side and bottom respectively, through the deck of the bayonet is electrically connected with the outside world, the head of the sidewall with at least one direction of rotation along the outer thread sequentially provided which consists of a straight edge and bevel stopper chainrings. The utility model has the advantages of: outer wall of the lamp stop tooth slices, it can only precession, not spin out, to achieve the screw lampholders irreversible bayonet connection, to adapt to standardized energy-saving lamps. Lamp base converter includes a conversion portion and the connecting portion, wherein the conversion unit has two projecting upper metal joints, metal connector through the upper portion of each converting its internal two metal rivet; said connecting portion is provided with internal threads at both ends, and the conversion portion and the connecting portion by a threaded connection. By using this converter that turns on the market for halogen GU (10) head into E (27), E (26), E (14), E (12) apply to ordinary energy-saving lamps, etc. the lamp....

[2013-06-09]

Lamp holder converters, including lamp, lamp holder and ballast, wherein the halogen lamp and straight tube holder (eg R7S) phase adapter, lamp holders (such as GR10q and GR8) adapted with energy-saving lamps, and energy-savinglamp ballast adapted. Of said lamp holder with said lampholders as well as of said ballast through the plastic housings, conductive rod and the lead-phase connected to, the formation of a be able to straight tube halogen tungsten lamp tool converted into a energy-saving lamp used in this luminaire converter. The utility model of lamps converters, through the adapter's lamp holder, lampholders and ballast, be able to a very good put energy-saving lamps applied to the straight tube halogen tungsten lamp those with Secondary, so as to achieve purpose of energy saving; while at the same without change the original straight tube halogen tungsten lamp tools of the pattern, be able to fastest, most simple and convenient and most economical ground use of existing resources, put straight tube halogen lamp tool converted into a energy-saving lamps come used, thus the most optimize the ground save energy....

[2013-06-08]

Talc porcelain lamp holders main ingredient MgO SiO2 density g/cm32.8 material properties Water absorption% 0 sintering temperature ℃ 1350 Physical Properties Hardness HV800 flexural strength Kgf/cm2900 compressive Kgf/cm24000 maximum temperature fracture toughness Map.m3/2- ℃ 1100 thermal characteristics Thermal expansion coefficient / ℃ 6 * 10-6 thermal shock force T (℃) 200 thermal conductivity W / mk (25-300 ℃) 2.5 - 200C> 1012 volume resistivity 1000C>. cm1010-1012 electrical Characteristics 3000C5 * 108 permittivity dielectric breakdown strength KV/mm10 100MHz (E) 5.8...

[2013-06-07]

SMD power LED tube lighting package Including high power LED, aluminum PCB board, radiator, power supply, lamp head and lamp, the power LED on the aluminum PCB board soldering pads on the PCB board fixed to the aluminum radiator, Grease coated board is provided between the drive power is fixed to both ends of the heat sink, the heat sink of the lamp with a hollow cylindrical form, the lamp head is connected to the closed end portion of the heat sink of the hollow cylinder body. The radiator for the long curved body, the excavation of a rectangular plane with a groove, and its surface extension of certain heat sink. The lamp is a hollow cylinder having an axial opening, to the inner wall surface of sawtooth, the inner wall surface of the opening portion has two symmetrical recesses. The flat sides of the radiator fins inserted into the chimney recess openings connected to form a hollow cylinder moves. The product is used for indoor lighting and cabinet products....

[2013-06-06]

Ceramic metal halide lamps, ceramic tube is directly across the two electrodes sealingly connected, the ceramic tube is provided with a metallic conduit, a metal pipe sealed at one end, one end of the ceramic tube communicates. Its manufacturing method, the first electrode and the metal conduit of the surface passivation treatment, and the ceramic tube and the electrode are assembled together, the metal pipe and the ceramic tube assembled together, followed by heating to achieve the ceramic tube at both ends of the electrode (2), the metal tube and the outer surface of the ceramic tube is sealed by a metal conduit filled with an inert gas, Add pills and mercury, and finally with a laser package metal conduits (4) of the outer end. This structure is simpler, more streamlined manufacturing method....

[2013-06-05]

The decoration lamp in the night light, lighting equipment involved, including lamp holder and the lamp base connected to the lamp cap, the inner space of the cap plate mounting machine, machine the board mounting the light emitting diode LED or SMD light, the bulb within the space is also installed ornament; said decorative objects and board fastening, and is located within the space of the lamp; said decorative material can be an animal series modeling, or plant series modeling, or landscape series modeling, or ocean series modeling, or text series modeling, or building series modeling, or action series modeling and so on. Its beneficial effects in that: Nightlight temperature is not high enough to have full use of the internal space, the lighting and decorative features the perfect combination of this new night light to market that will provide people with more choices....

[2013-06-05]

The Shower heater lighting or a set of integrated ceiling lighting and heating functions in one dual-lamp. The dual lamp, including lamp holder, glass bulb shell, glass bulb in the bulb holder set and sealed with clay, and its structure is characterized by: a glass bulb shell is provided with a heating filament and lighting filament glass bulb provided with a septum top heat-reflective film, lamp provided with heating and lighting connections connecting inserts inserts, the heating filament connecting jacks to connect with heating, lighting and lighting filament connecting jacks to connect. The utility model advantages are: lighting heating function combo, material savings, cost savings. Reducing the footprint of the bulb, making the Yuba integrated ceiling heater or the overall layout of elegant, while a single bulb glass bulb volume increases will help to extend lamp life....