Professional Custom Lamp Holder Accessories Manufacturer

[2015-06-25]

How to buy good quality energy efficient light bulbs?Energy-saving lamps with energy saving, soft light, etc., by the vast number of consumers. In the face of all kinds of energy-saving lamps. First is to choose well-known brand products, consumers can refer to the national government procurement of qualified suppliers list, from selected well-known brands, and in specialized in lighting mall or lighting franchise stores procurement. To buy energy-saving lamps can also reference has "CQC" authentication (Security), and (energy-saving certification) two certification mark, certification of products that meet the requirements of national security and energy efficiency standards, but the two certification by the enterprise voluntary participation, do not have mandatory followed by observation of the packaging products, including product trademark, nominal power. Good energy-saving lamps should be bright and clean appearance, no bubbles, lamp fluorescent powder coating should be fine, no particles, a white uniform; the lamp cap and the lamp should be a vertical state, should not be tilted; the contact surface of the lamp holder and the power supply should be flat....

[2015-06-24]

As the old saying, human life, safety has become a priority among priorities. But now there are many problems such as fluorescent light fixture, electric socket, Cause this phenomenon is now the reason for the most of the socket is more than a socket, it has two poles jack, there are three pole jack. In order to facilitate the use, many people used to insert the 2-pole plug into the three pole plug, such mixed socket factorial size unworthy, often resulting in poor contact, cause ignition or leakage, leave serious security hidden trouble of electricity also if the cross polarized plug connected between the socket electrode and grounding electrode, when the three pole plug grounding pin is inserted into a multi-purpose socket jacks electrified will make the electrification of the housing of an electric appliance, this appears to be a risk of electric shock, resulting in serious consequences. It can be said that many families are in this situation, you can be careful oh. Parents are very worried socket will power up with children....

[2015-06-24]

A lot of people think that as long as the lamp is on, it means that there is no problem with the installation of lamps and lanterns. However, it is very important to install the lamps and lanterns, which is very important. If the installation is hasty, construction operations are not standardized, will give future life leave a security risk, will affect the lamp life that check James lighting installation how is installed after the try, if all the lights came on, did not ask questions when the installation of lighting and wiring should use insulation tape wrapped up, so that we can ensure lamps and lanterns to use is the sole criterion for safety lamp shines or not instead of checking fluorescent light fixture installation quality....

[2015-06-22]

Kitchen in the family life is a very important, the use of the kitchen lamps should follow the characteristics of practical, longevity. We often find that the lights in the kitchen are very fast. Especially every ignition cooking in the kitchen, the lamps and lanterns use about half a year appeared cap rust, began to poor contact, have even corrosion was unable to use is mainly because the fuel in the combustion will produce acidic gases such as sulfur dioxide and metal products have very serious corrosive effect. Also in the kitchen, often water vapor, water vapor and sulfur dioxide, the corrosion effect of the lamp is very strong in the device in the kitchen lighting, resettlement should be as far as possible from the stove, don't let gas, water vapor directly affects the device pumping hood or exhaust fan can solve this problem....

[2015-06-22]

When it comes to home security, risk coefficient is the highest is probably the kitchen, here is the most prone to accidental injury, such as cutting injuries, burns or burns, and so on. Some people think you accidentally caused, in fact, kitchen design quality can directly reflect the safety of the kitchen and no 2. First,Wet hand shall not touch electrical and electronic device, otherwise easy to get an electric shock, light socket best use the pull switch 2. Power fuse is not available copper wire instead. Because of the high melting point of copper wire, not easy to fuse to protection circuit, selection of suitable fuse. Second,Electric rice cooker, electric cooker, induction cooker and other mobile appliances, after use in addition to turn off the switch, pull the plug, to prevent switch failure. Because of the long time electricity damage to electrical appliances, caused by fire. The average family in normal circumstances should not use electric furnace, such as the need to use the electric stove should have a dedicated line....

[2015-06-22]

With the rapid development of modern civilization, people's daily life has been separated from the use of electricity, electricity has brought a lot of convenience, but also has many dangers. We remind you that a heart of reverence to the electricity, used with caution, make every effort to ensure the safety in the first place, daily lighting lamp switch, lamp, light socket can not be damaged, motor transformers and other electrical equipment to the regular maintenance, iron to be loaded on the line. In addition, power into the line, temporary line, power equipment to install a separate switch and insurance, or can not immediately cut off the power after the accident. In addition, maintenance and installation lights, electrical appliances must pull off switch and fuse box and so on but if still accidentally electrocuted, near and no rescue, at this time must be calm....

[2015-06-22]

Firstly,The load carrying capacity of the fixed part of the wall suspended ceiling lamp should be matched with the weight of the lamp, the lamp should be equipped with the hanging line box, and each of the hanging box can only be fitted with a set of pendant lamp. The surface of the pendant lamp must be well insulated, and there may not be a joint, and the wire cross section shall not be less than 0.4 mm. In the wiring box hanging line should be taken to prevent thrum stress the lamp drop measures. Weighed more than a kilogram of lamps should be arranged chain. When the chandelier lamp weight more than 3 kg, should use the embedded hook or a bolt fixed. Chain lamp lamp line should not be subjected to tensile, line lamp should be and chain series fork in 4 together, with incandescent lamp as the light source of ceiling lamp can not be installed directly on the flammable component; lighting shall be close to the lampshade; when lighting and insulation between the distance less than 5 mm, lighting and insulation of Taiwan should take measure to prevent the heat.The power of incandescent lamps shall be maximum power....

[2015-06-21]

The solar street light elements and dealing theory Solar street light was composed mainly by solar module, clever controller, maintenance-free batteries, light-weight supply, such as gentle poles and structural factors. The working principle of solar street light are solar mobile parts of photo voltaic radiation throughout the day will be transformed into electricity, maintenance-free batteries to charge the battery to your night from the mild supply to supply energy load, the sunshine supply routinely when from the dim. While in the legislature reserved the situation on the lamp (excavation) according to the regular just one cubic meter pit ; for pouring position towards the embedded elements. Embedded parts placed in the pit to the middle, PVC pipe threading on the conclude items are embedded involving another finish over the storage battery (as proven). Embedded parts to maintain the muse plus the original ground floor in the same degree (or screw the very best and on the exact level given that the unique ground surface area, in accordance with the location can be important), there exists the side parallel using the street; so the poles had been erected to be able to assure that after the appropriate devoid of deviation. Then set in C20 concrete pouring, pouring out the whole process of vibration or shock persist with make certain the total compactness....

[2015-06-19]

Currently, LED bulbs have turned out to get increasingly more acknowledged by the public. The visual physical appearance of LED light bulbs seems very much the identical (or very similar if not the same) as the standard light bulbs. Nevertheless, until eventually not too long ago, LED's haven't turn out to be common from the mainstream lighting marketplace, more than likely due to the fact LED lamps are nevertheless somewhat more pricy than classic lighting this kind of as incandescent light bulbs and fluorescent tubes....

[2015-06-19]

The European Union will begin making the changeover from power-draining gentle bulbs to extra strength efficient ones on September 1, the eu Commission claimed. Britain has also launched a ban on manufacture or import of 100 watt toehold bulbs from Tuesday....