Professional Custom Lamp Holder Accessories Manufacturer

[2014-05-11]

E10 Miniature Screw Base 10mm diameter E11** Mini-Can (Miniature Candelabra), 11mm diameter E12** Candelabra (US), 12mm diameter, typically found on night light bulbs, chandelier bulbs E14** European Base (obviously an American term), 14mm, typically found on imported chandeliers and sconces E17 Intermediate Base, 17mm (appears to be about 5/8" diameter) found on industrial bulbs and on some decorative bulbs E26 Medium Base (US), 26mm diameter (about 1") E39 Mogul Base (US), 39mm, (slightly over 1-1/2") found on some incandescent bulbs and on many HID lamps...

[2014-04-24]

Ceramic / Porcelain Lampholder - Used For E27 (27mm Diameter Screw In) Lamps - Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Base - 47mm Height x 42mm Diameter...

[2014-04-21]

Specification: 1. Copper 2. Iron plated copper 3. Some parts is copper, other parts is iron plated copper 2. Material: Ceramic, Porcelain 3. Rated Current: 20A, 30A, 60A, 100A, 200A 4. Voltage: 600V 5. Style: 2poles, 3poless, 4poles 6. Throw: single, double 7. Fitting: Full iron plated copper metal parts Full iron plated copper metal parts and zinc alloy terminal block Full cooper metal parts...

[2014-04-18]

Standard porcelain G5.3 halogen lamp socket With heat resistant flying Leads Approximately 300mm long 12mm spacing between each fixing hole Can be used with standard low voltage MR16 downlighters. Comes with 12v connector block. Porcelain lampholders MR16 MR11 12V Low Voltage Lampholders - Wire Connector Sockets for Lamp Light Recessed Downlights Specifications 1.Color: More than 7 color 2.Material:plastic,bakelite,porcelain 3.Working Voltage:110-660v 4.Current: <16A 5.Customized:yes Wire selection 0.5m2 braided wire 15CM 0.3m2 silicon rubber wire 15CM 0.5m2 silicon rubber wire 15CM 0.75m2 silicon rubber wire 15CM 0.3m2 silicon rubber braided wire 15CM 0.5m2 silicon rubber braided wire 15CM 0.75m2 silicon rubber braided wire 15CM...

[2014-04-18]

Sporting two 10-inch lead wires, the MR16 G5.3 mini bi-pin socket 12V CERAMIC BASE is rated for a maximum wattage of 750 watts and a maximum voltage of 250 volts.The socket has a ceramic body and a mica cover, allowing for more heat resistance. MR16 MR11 Lamp light socket holder wire connector base plug.Fitting for any MR16 MR11 LED light or traditional halogen lamps. Each order is for a Lot of 20 sockets (Fifteen) Body material: High Frequency Ceramic Cable kinds:silicone or teflon or braided or high temperatured cable Cable sizes:0.5mm2 or 0.75mm2 or 1mm2 Cable color:White or black or red/brown Rating:250V,2A Certificate:CE,VDE,Rohs and UL Others fittings:bracket,back plate,sleeve,terminal block,terminal etc Size: 17 mm Dia x 10 mm H / 150 mm Wire> Application: Use this to fit any MR16 or MR11 bulb into a hardwire system. It allows you to plug in your LED bulbs and attach it to normal lighting wires. This round sockets are made from porcelain and work with MR16 lamps along with many other bi-pin lamps, including G4, G6.35, GY6.35, GX5.3 MR16, GZ4 ,MR11 porcelain lampholders. Package Including:20pcs x MR16 MR11 Socket Base plug...

[2014-04-18]

Porcelain lamp holder includes all candelabra, medium (standard) sizes, and mogul size sockets. Porcelain lamp holders are more heat resistant and typically last much longer than regular phenolic (black plastic) lamp sockets. These porcelain sockets work well when used in fixtures with little or no air circulation available for the light bulb. white porcelain lampholder has a glazed porcelain finish and a medium base socket (E26). It is UL listed for indoor use only and includes two screw terminals for easy installation. This medium base socket is rated for a maximum wattage of 660 watts and a maximum voltage of 250 volts and is best used in spaces such as closets, utility rooms, and basements. Model:E26 lampholders Serie:E26 Lampholder (America (U.S.A and Canada) standard) Rated:250V,660W Colour:White,Black,The rice of yellow,Transparent,Any colour. Cable section: 0.5mm2-1.5mm2 Terminal: Push in terminal. E26 lamp socket can be used with European standard E27 base bulbs. Both types are interchangeable, and some light fixtures refer to these sockets as E26/E27. However, E27 sockets are rated for 220V; therefore, the voltage compatibility of bulb and light fixture must be checked....

[2014-04-17]

Porcelain lampholders available for E27 (ES) . These are particularly suitable in applications where high temperatures may be produced, by high bulb power or by operation in a confined space. Connection is by means of screw connectors and can be made from above or from two sides. Holes are provided for two mounting screws or adding mounting brackets, clamps, and plates. Ceramic / Porcelain Lampholder - Used For E27 (27mm Diameter Screw In) Lamps - Heat Lamps, Metal Halide Lamps, Sdium Lamps ETC With The Above Base - 47mm Height x 42mm Diameter - Suitable For Poultry Chicks, Pups, Lizards and all Types of Animals Specification: 1.Common Name：E27 lamp holder,E27 lamp base,E27 lampholder,E27 bulb holder,E27 lamp socket 2.Model No.:CDS320 E26 lampholder 3. Certificate: CE ROHS 4.Material:porcelain 5. Inner metal:copper or zinc alloy or aluminum or iron...

[2014-04-17]

Porcelain Mogul lampholder socket. Bulk packed loose with no individual packaging or instructions. Features include: Lamp Socket Base: Mogul Construction: One-Piece Lamp Type: Super Metalarc Horz HID Circuit: Single Circuit Access: Back Wired Wattage Rating: 1500W Voltage: 600 Volt Termination: 12-Inch 14GA SEW-2 200C Leads Mounting: 2 8-32 Screws Screw Shell Material: Nickel-Plated Copper Alloy Shell Material: Glazed Porcelain mogul base porcelain lampholder. European mogul lampholder provides the ultimate in quality and performance for high intensity discharge (HID) lighting applications. Made from the highest-quality porcelain, the lampholder provides a superior screw shell with lamp grips. Contact Material: Nickel-Plated Copper-Alloy Color: Yellow Standards and Certifications: UL/CSA attage Rating 1500W Voltage 600 Volt Termination 12-Inch 14GA SEW-2 200C Leads Circuit Single Circuit crew Shell Material Nickel-Plated Copper Alloy Shell Material Glazed Porcelain Contact Material Nickel-Plated Copper-Alloy Center Coil Spring Stainless Steel...

[2014-04-15]

Porcelain E40 lampholder for ceramic heaters, emitters, metal halide, heat lamps, grow lamps, reflector lamps, spot lamps, incandescent and discharge lamps (HID). Suitable for use with high powered lamps of up to 1,000 watts. Made to withstand the high temperatures generated by heat basking / discharge lamps. Many applications including aquariums and vivariums. Specifications low price porcelain E40 lampholder 1.type:E40 ceramic lamp holder 2.we can give your a low price 3.hot sale 4.Good quality Poecelain E40 lampholder details : We are manufacturer of E40 lamp holder for lamp holder socket E40 1. Type: Porcelain E40 2. Material: porcelain 3. Certificates : Meet CE/RoHS standard 4. Metal: Copper/Iron/Aluminium/stain steel, according to customers' choice 5. OEM/ODM are available 6. Voltage: 250V 7. Electric current: 5A 8. Export market: North America, South America, Middle East, Southeast Asia, Africa, Europe, etc. 9. Usage : Decorate lighting and as lamps accessories 9. Package: Paper packing and as your requirements 10. Payment: T/T 30% deposit ,70% balance before shipment; L/C at sight 11. Delivery time : 15-30 days after receiving down payment ....

[2014-04-15]

Specification: 1.Common Name：E40 porcelain lampholders,E40 lamp base,E40 lampholder,E40 bulb holder,E40 lamp socket 2.Model No.: 519-8 E40 lampholder 3. Certificate: CE ROHS 4.Material:porcelain 5. Inner metal:copper or zinc alloy or aluminum or iron 6.Voltage: 250V~750V 7.Electric current: 4A~16A 8.Packing: 400PCS/CTN 372000PCS/CONTIANER CTN size:41*32*25cm(0.0328cbm) Gross weight:21kgs OEM,ODM are available. Edison screw E40 porcelain lampholders specifications: 1.copper plated nickel metail parts with light accessories 2.iron plated nickel metal parts alloy terminal block 3.iron plated zinc metal parts alloy terminal block Details: series:ceramic lamp holder E40,E27,B22,E12,E14,E17 etc material:ceramic certificates/;CE standard 1)metal:aluminum/iron/copper/brass/stain steel,according to customer's choice 2)OEM/ODM are available 3)we are a factory manfacture in porcelain product more than 10 years and delivery product direct. 4)safe usage 5)high quality and best service 6)delivery time:about 20 days after we receipt the relevant payment 7)terms of payment:30% payment by T/T or L/C at sight in advance,the balance before shipment 8)packing:by standard export carton packing 9)function:decorate lighting and as lamp accessories 10)sample provided of free charge within 3 days....