Professional Custom Lamp Holder Accessories Manufacturer

GU10 lamp holder specifications (with a U-shaped pin pitch 10MM plug-in lamp) MR16 low voltage spotlights Specifications diameter 50MM) (GU5 .3 E27 lamp specifications (which is often said thread (Edison) Base) JCDR high-voltage spotlights Specifications Overall MR16MR11 spotlights Specifications (GU4 diameter 35mm)
GU10 lamp holder is our day-to-day use of the bayonet, GU: G said the lamp type plug-in, U lamp partial rendering U-shaped behind the numbers that light foot hole center distance (mm mm) . MR16LED spotlights, MR11 MR at the beginning of the line part of the lighting small spotlights used this lamp holder, usually small spotlights two pins of the device lunch. Spotlights MR16LED, GU10 LED spotlights the lamp holder, PAR30 LED Spot Light PAR38 LED spotlights different diameter, are the world through the norms and it is called, is a light cup, spotlights called each suitable for different ceiling light lamp holder. MR16 LED spotlights refers to the maximum outer diameter of 2 inches with a multi-faceted reflector lamps in the lighting industry, MP11 is smaller than MR16 LED lamp fixtures.

Now talk about GU10 lamp holder base, this is actually a lamp holder, and MR16 are two different concepts currently on the market with common parlance the two confused, so there are many professionals may not be aware of. Gu is cylindrical contact head, 10 refers to the distance between the two contacts is 10 mm. general lamp holders G5.3, E27, respectively plug pin and screw-on caps, the latter figure refers to the distance between the two pins and spiral diameter of the mouth. (Note G5.3, GU10, many people no longer distinguish the difference between the two.)