Professional Custom Lamp Holder Accessories Manufacturer

The self-ballasted electrodeless fluorescent structural design, auxiliary housing is not equipped with any lamp holders, when the lamp screwed to comply with the provisions of GB 17935 lampholders, can not touch the metal pieces inside the lamp or lamp-charged metal parts.
 Test Figure 1 provides means to verify their eligibility, if necessary, a force of 10 N was applied.
 Screw base lamp, its structure should be designed to meet the requirements of the general lighting (GLS) light bulbs to prevent accidental contact.
 With GB 1483-2001 7006-51A for inspection and E27 base gauge to verify their eligibility.
 B22 lamp holders, self-ballasted electrodeless fluorescent inspection requirements and inspection requirements for using the same lamp incandescent.
 In addition to the lamp on the current-carrying metal parts, metal parts of the lamp outside should not be charged or charged easily. For the test, any removable conductive material should be made without the use of tools, placed in the most unfavorable place.
 The insulation resistance of lamp holders and dielectric strength test to verify their eligibility.