Professional Custom Lamp Holder Accessories Manufacturer

The porcelain lamp holder & Bracket is for use when mounting compact/basking lamps into vivariums. It consists of a Ceramic E27 Lamp holder mounted onto a black metal bracket, which either screw fits onto a wooden surface, or can be attached to a glass inner surface using adhesive pads (available separately)
The flexible bracket can be angled to direct the lamp, and create the ideal basking area for your reptile.
The power lead incorporates a manual switch, and is complete with fitted plug.
This holder is one of the best on the market and works well with all wooden vivariums and can operate bulbs up to 250w.

Metal bracket can be fitted to base either way as shown in photo to suit your fixing requirements using two screws provided, bracket is threaded for screws and these pass though lamp holder base into bracket. Two further screws are provided (7.5mm thread length) for fixing bracket to surfaces, bracket is also threaded for these screws or you can use normal wood screws (not supplied) if fitting to wooden surfaces. In addition bracket has screw for earth leads if they are fitted to metal surface.
Ceramic lamp holders are ideal for use with high powered lamps 100 watts or more (suggested for 80 watts also) and essential if using ceramic heat lamps and emitters. These lamp holders are specially made to withstand the high temperatures generated by heat basking/discharge lamps, normal lamp holders can start to become brittle and discolour if used with high wattage (and medium) heat lamps.

E27 porcelain lamp holder (including 5kV models). B22 porcelain with screw terminals, E14, E27 (including 5kV models), B22 thermoplastic T210 with push-wire terminals,
B22 brass 3 piece with thermoplastic insert and earth connection,
Accessories: Snap-on Insulating Caps, STEAB Cable Clamps, Shade Rings,

•