Professional Custom Lamp Holder Accessories Manufacturer

Lighting and lamp holders inspection testing, general inspection in accordance with the proportion of 2%, a little strict experience more. Take a look at the packaging operator does not meet the requirements, marks, labels, etc. are correct.General export to the countries of the AmericasE26 lamp holder need to cross the floor test, some European countries, the amount of E27 lamp holder also need to drop test, but the EU regulation no strict U.S. regulatory. Floor to try to throw the need to test the carton edge, corner and surface. Unpack drop test done, to see whether the packaging is qualified. In particular, there is a ceramic lamp requires special attention. Take a look at whether the appearance of pitting, scratches and other problems. And then see the porcelain lamp holder meets safety standards, generally European and U.S. regulatory rules. Look at the lighting of the lamp standard accessories are complete qualified, wire length, lamp size and the same model or meets safety and regulatory requirements, manual meets the requirements, accessories are complete, need to play some glass or crystal. And do lit tested. High pressure lamps need to do high-pressure test. Some lamps also need to smoke test, pressure test, etc.