Professional Custom Lamp Holder Accessories Manufacturer

MR11 and MR16 bulbs will both fit into the same connector since the terminal pins are 5mm apart on each. Two holes are drilled through the connector through which you can screw the connector into position on your wall or whatever. The bulb holder pictured above is now available: MR16 procelain Bulb Holder, as are compatible 12V LED spotlights.This halogen bulb socket fits G4, G5.3 and G6.35 bi-pin halogen bulbs. The socket has 18 inch wire leads. This halogen bulb socket can be used with most bi-pin halogen bulbs
One advantage of LED over halogen spotlights is that LED spotlights are far cooler when they are on and so pose far less of a fire risk when used in enclosed spaces etc. These connectors are made to cope with hologen induced temperatures of up to 250 degrees celcius so they are enormously over engineered for 12 volt usage. Therefore they are very safe.
HALOGEN SOCKET, 200C 125V 100W MAX, 12" LEADS, 1/8IP HICKEY, fits G4, G5.3, GU5.3, GX5.3, GY6.35 bases, with riveted retaining clip for MR16, overall height 1.5"

Our Factory is a professional manufacturer and exporter that specialized in the research, development and production of lamp holders, knife switch, fuse, insulator, ceramic tiles, and so on.