-
[2013-03-19]
LED light-emitting diode as a light source floor lamps by the lampholders, the stent, the light source and the lampshade, characterized in that: a light source is from the LED light emitting diode fixed on the PCB electronics circuit board, PCB, electronic circuit board connected circuit controlboard, circuit control board is connected to the power switch. The LED light-emitting diode as a light source lamp structure simple, energy-saving, long life, light and soft....
-
[2013-03-19]
Total reflection energy efficient sets of fluorescent fixtures, including Universal Fluorescent Lamp Holders, conversion bracket, fluorescent tubes and nano reflector. The fluorescent tubes installed in the conversion bracket, and then by the conversion bracket connected to the general inductive lamp holders. Conversion stent electronic ballast and the main control circuit board. In the conversion bracket nano reflector, The nano reflector hooded fluorescent tubes. The new structure can reduce energy consumption, improve the illumination brightness of the original energy-saving fluorescent lamps enhance the more than 2-fold; simple design reasonable conversion bracket, nano reflector lamp Detachable even can be replaced at any time....
-
[2013-03-18]
New lamp holders, including wires, the positive terminal, a negative terminal combination rivets, an insulating cover, the insulating cover, characterized in that: the wires stripped period sheath and the stripped sheath of the two wire ends formed a certain distance,The positive terminal and a negative terminal, respectively the two wire ends caulking, and placed under the insulating cover and the insulating cover. The new structure is reasonable, good safety performance, reduce the defect rate in the production process, reducing the assembly process and time, improve production efficiency, thereby reducing costs, and increase the competitiveness of the porcelain lamp holders in the market....
-
[2013-03-18]
Cooling temperature lampholders,Especially suitable for interval-type anti-lamp lights and increased safety anti. The device with a wire holder and a thin metal threaded sleeve, thin metal threaded sleeve processing within threaded metal heat sink. It can solve the bulbs frequently turn around the long-standing problem in the prior art, can significantly increase the lamp life, reduce maintenance workload, and to ensure the safe and reliable lamps use....
-
[2013-03-18]
Single-ended insert Pin-base energy saving lamps can be placed in the lamp holders, at the same time involving the three can be completed on the same purpose as the demand convenience combined with the energy-saving lamps lampholder plastic parts; applicable to the different power singlelampholder end energy-saving fluorescent lamps, including the lampholder body symmetrical set the body for the card access lamp bayonet, limit device also has to be applied to the lamp at the back of each card pin;the order energy saving electronic ballasts lampholders allows three different standard IEC standard lamp to start three different wattage lamp placed in the same porcelain lamp holders....
-
[2013-03-18]
Light poles and lamp holders locking structure, including: porcelain lamp holders; connected lampholders group, group connected components; groups connected to the group of connected components within the clamping unit and then the light pole with the group of connected components group. One end of the poles has a engagement assembly, the plug rod of the engagement assembly is docked in the group access component, and through the clamping unit and two elastic clamp fixed at the docking lever recess, so that the lamp the rod is easy to assemble and disassemble the lamp holder, and even after several light poles and lamp holder disassembly achieve a solid combination of efficacy....
-
[2013-03-18]
Aromatherapy lamp holders by a base and superstructure inside the base, respectively, with the lamp holder with bulb wire with adjustable light switch by the the lampholder below bored base above the inner edge of the ring groove is formed, andsesame oil can be placed in the ring groove, formed with a fitting edge of the outer edge of the base above, can use cover and the chimeric the margin each other chimeric, on the cover the formation of several available sesame oil by bulb heating evaporation holescan form a very security of aromatherapy porcelain lamp holders....
-
[2013-03-18]
Fluorescent energy-saving lamps, With lamp holders, tube, lamp base, electronic ballasts, lampshades, shell, lamp fixed to the lamp base, the housing on the shell and in sets, the upper part of the upper shell access lamp, the lower part of the upper shell access in sets, in sets of ring-shaped body, in the ring-shaped body inside of the extended partition, the ballast circuit set in sets of spacers between the upper shell, lamp holder connected in sets, the lampshade cover mouth then sets an annular body....
-
[2013-03-17]
Aluminum fluorescent lamp bracket, aluminum alloy frame and electronic ballasts, where: aluminum alloy stents body by the end boxes,lampholders and surface cover composition, ballast core and ballast shell, in order to overcome the presentheat bad drawback electronic ballasts technology, the aluminum alloy frame bottom box and face covered with aluminum alloy stretch forming directly loaded into the the ballast core with integrated ballast housing, the utility model heateffect, the production process is simple....
-
[2013-03-17]
Fluorescent fitting conversion structure, including a T8 Lamp matching the bracket body and placed in the lamp holders of both ends of the bracket body, characterized in that: the lampholder is provided with a detachable socket converting means, the lampholder one end of the converting meansconnection with the lamp, the other end for the following T5 lamp connection. lamp holders converting means to the lampholder obtained on the extension, shortening the distance between the two lampholders, the stent in the space T5, T4 Lamp matching. Also, because the socket converting means is removable, so that in the space may T8 or T5 lamp holders size matching conversion....
EMAIL US
SKYPE