Professional Custom Lamp Holder Accessories Manufacturer

Compared to incandescent and energy-saving lamps, and in some respects currently has some energy-saving lamps do not have the advantages, such as compact size, light source cost low, color is excellent, the state not subject to the influence of ambient temperature, does not contain electronic components and supplies power to the system without adverse effect and other advantages. Indicating lamp, emergency lighting and decorative lighting in the instrumentation, at present still plays a role which can not be replaced by energy-saving lamps. Therefore, vigorously promote green lighting energy-saving lamps products at the same time, also launched part of the quality of the incandescent lamp, such as decorative lighting, for the favorite choice of the majority of users of the product.

FAQ-1: incandescent lights, glass bulb appeared in a mass of white smoke, a light off, what is the reason?

The incandescent lamps are made of glass and light socket, glass easily in transport and move in the process of impact, vibration and appear to the naked eye can not see the tiny cracks and leakage. Air enter the crack meets the lighting, a turn on the lights in the filament at high temperature with oxygen in the air react, smog formation, and the filament is burnt, so a bright light destroy. Therefore, the light source products in the transportation, moving, and replacement, installation process, should be handled with care, to prevent rupture

FAQ-2: incandescent lamp filament break, and then shake it, take the filament, why is it more bright than the original?

The incandescent lamp is the use of electric current flows through the filament, so that the filament heat to the incandescent state and luminous. When the filament cut off and set up, the original filament length has been shortened, so the filament resistance is small. When the electric current, the current flowing through the light bulb will be greater than the original, so the light bulb will be brighter. Due to the increased current flow through the bulb, so cut off and take the filament of the bulb also does not take a long time and because the current is too large and unsafe. So we strongly recommend that users, the damage of lighting should be timely replacement of new lights, high pressure sodium (HPS) materials are sodium, sodium in the excited discharge, the radiation spectrum line mainly concentrated in sodium atoms feature spectral line 589nm and 589.6nm near, the wavelength of the spectral line is visible light yellow light band, so the lights appear yellow