Professional Custom Lamp Holder Accessories Manufacturer

LED stands for Light Emitting Diode. The diode comes in the form of a computer chip on a circuit board. The properties of the diode cause it to generate light when an electric current passes through it. Depending on the chip and materials used, different colors in the color spectrum can be created. Prior to the technological revolution of the 90s and the rapid advancement of the microchip, the LED was used only in small-scale applications such as indicator lights.

The same advancements that spurred the computer to reach dizzying levels of efficiency have also done the same for the LED. Just as computers have become faster and cheaper, LED lights have become brighter, smaller, less expensive, and more sophisticated.

LEDs are solid state technology. That means there is no glass bulb, no pressurized gases, no mercury and no burning filament. With the traditional bulb, 90% of its energy is transmitted as heat while light is a mere by-product of electrifying the metal coil inside the bulb.

E12 LED and E14 LED light bulb lamp holders are typical of LED chandelier and LED night lights. EagleLight offers several types of LED candelabra LED bulbs including clear lens, frosted lens and LED torpedo lamps and LED flame light. Available in wattages that replace from 15W to 40W.
E12 LED bulb lamp holder is slight smaller screw-in lamp holder than then E14 screw-in lamp holder. Often used in LED chandeliers retro fits and as energy efficient alternatives to night lights. The E12 LED and E14 LED lamps are also known as LED flame bulbs and LED torpedo bulbs.

GU10 LED Bulbs are characterized by having a 2-pin light bulb lamp holder that inserts-and-twists into the socket. The bi-pin GU10 LED light bulbs has pins that are 10mm apart. EagleLight LED Lighting offers several forms of LED GU10 lightbulbs including dimming LED GU10 bulbs and GU10 LED spot lights.

MR16 LED lamp holders are available in the standard two pin GU5.3 bi-pin lamp holder as well as the E27 LED medium screw lamp holder. The products shown here are all the GU5.3 bi-pin lamp holder type, for other 2 inch diameter LED light bulbs please refer to the E26 & E27 LED section of the site. There you will find R20 and PAR20 bulbs that have similar shapes to MR16 LED lights but have a E26 or E27 LED lamp holder type.