Professional Custom Lamp Holder Accessories Manufacturer

Ceiling lamp fixture is widely used in family, office, entertainment and other places, at the time of purchase should first consider the safety and quality of lamps and lanterns, and according to the room size, height and functions of aspects to consider when choosing 1. In a big store, buy a product of the "three" commitment of choose and buy, CCC certification mark lamp. When the choose and buy, look to three.

A look at the product identification is complete, regular product identification is often more standardized, should be identified: trademark and factory name, product type specifications, rated voltage, rated frequency, rated power. Two see the lamp power line is the CCC safety certification mark, the external conductor cross-sectional area should be greater than or equal to 0.75mm2. Third, look at the lamps and lanterns charged body is exposed, the light source into the lamp holder, the fingers should not touch live metal cap 3. Choose a higher anti electric shock protection categories: according to the protection against electric shock type, ceiling ceiling lamp can be divided into Class 0, class I, class II and class III. The safety of the 0 types of lamps and lanterns is poor, should try to buy I class, class II and class III lamps. 0 types of lamps are to rely on basic insulation as a protection against electric shock, in case of failure of basic insulation, it is easy to produce electric shock. I kind of lamps and lanterns of anti electric shock protection not only rely on basic insulation, and also includes additional security measures, namely accessible conductive parts connected to the grounding protection wire, accessible conductive parts in the basic insulation failure will not live. I type of lamps and lanterns of the ground terminal next to the ground, it should be noted that the metal shell of the I type lamps should be effective grounding, if the tube can touch the ballast, ballast should be effectively grounded. Class II luminaire anti electric shock protection not only rely on basic insulation, and has additional safety measures, such as double insulation or reinforced insulation, in case of failure of basic insulation, but also rely on the protection of the supplementary insulation. Plastic shell lamps are generally 0 or II class, the best choice for class II lamps and lanterns, II type lamps with symbols.

Lamps and lanterns of class III anti electric shock protection safety extra low voltage power dependent and inside the lamp will not produce higher than the safety extra low voltage voltage 4. Use the lamps and lanterns notes: buy Lamps, the first not to busy to install, should carefully read the marker lamps and read the installation instructions, in accordance with the instructions to install the lamp, according to the instructions in the use of rules use the lamps and lanterns. According to the signs of the source parameters timely replacement lamp aging, redness of the two ends of the lamp tube, should be the timely replacement of lamp, prevent ballast burn insecurity. 3 in the cleaning and maintenance should pay attention, do not change the lamp structure, not just the replacement of lamps and lanterns of parts, in cleaning and maintenance after the end should be according to the sample luminaire shall be installed, do not drain installed, wrong shipment lamp parts 1, characteristics of ceiling lamps commonly used square cover ceiling lamps, round ceiling lamps, Tsim oblate ceiling lamps, half dome ceiling lamps, - Bian ball ceiling lamps, small rectangle cover ceiling lamp fixture. Ceiling lamp is suitable for living room, bedroom, kitchen, bathroom, etc.. Ceiling lamps can be directly installed on the ceiling, easy to install, simple and elegant styles, give clear and bright sense 2, select the ceiling lamps generally have the ballast and lamp ring, the ballast has magnetic ballast and electronic ballast, compared with the inductive ballast, electronic ballast can improve the effect of light on the light and the system, instantaneous start, extended lamp life. At the same time, it is small, no noise, small size, light weight, power consumption is only 1/3 to 1/4, the light ballast, so consumers have to choose the electronic ballast. Ceiling lamps of the circular lamp with halogen powder and trichromatic fluorescent powder and powder lamp trichromatic color color, light and slow light degradation; powder halogen lamp display color and luminosity, low light decay quickly. Distinguish halogen powder and trichromatic phosphor lamp, lamp lit up at the same time, the hands in the vicinity of the two lamp tube, can find powder halogen lamp start the light color white, distortion, powder lamp trichromatic start the light color is color of skin. Ceiling lamp with a remote control with no remote control two, with remote control of the light switch is convenient, suitable for use in the bedroom.