Professional Custom Lamp Holder Accessories Manufacturer

Consumers in the purchase of energy-saving lamps, the need to pay attention to the following aspects:

1, product packaging should be complete,

2, product with energy efficiency labeling.

Energy-saving lamps energy efficiency rating is divided into 3 levels, of which the highest level of 1 energy efficiency. The higher the energy efficiency rating, the better the energy saving effect of the lamp. Energy efficiency logo printed or pasted on the energy saving lamps, the obvious part of the 3, the choice of energy-saving lamps, power and luminous color

Power - power (P) the size of the size of the lamp power consumption. According to the illumination requirement, choose the right energy saving lamp power. In the case of the same lighting effect, energy-saving lamp power is about 1/6 of incandescent lamp. If you want to get the same lighting effect with 60W incandescent lamp, the general choice of 10W energy-saving lamps. A few square meters in the small area room lighting 9W-13W suitable, more than 10 meters of room lighting can be selected 32W-36W straight energy-saving lamp luminous color, mainly according to the use of the environment and personal preferences. In the bedroom, restaurants and other places relatively warm can buy marked "RN" or "Rd" warm colors of energy-saving lamps, in the living room, kitchen and other places marked "RR" or "RZ" cold colors of energy-saving lamps, and warm colors of energy-saving lamps the luminous efficiency and color rendering index are higher than cool colors of energy-saving lamps, energy-saving lamps appearance selection.

A look at whether the loosening of the lamp socket, a lamp tube, lamp fluorescent powder coating is uniform without missing coat, off powder, fluorescent powder should be crystal white, no yellow or gray hair phenomenon two electrified light tube, lamp light is normal uniform, lamp should be no obvious spots, and a luminous body is flicker free 5, due to the self ballasted fluorescent lamps with a ballast circuit. Therefore, it is necessary to frequently switch lamp source place, it is best not to use and dimming the lamp or other dimming of the lamps and lanterns are generally not used energy-saving lamps.