Professional Custom Lamp Holder Accessories Manufacturer

PGZ 315 lamp holder socket can be used to turn any old, standard HID Grow light reflector into a CMH 

315-Watt reflector Adapter for 315-Watt CMH lamps to fit into standard 250W to 1000W 

mogul sockets.

315-Watt CMH Grow Light Socket Adapter PGZ18 Lamp holder Converter for E39 Mogul Base

The E39 to 315w PGZ18 Lamp holder adapter is available for use with the 315w CMH lamps. 

It allows the user to convert a “standard” reflector with an E40 fitting into a 315w 

reflector.

PGZ 315 lamp holder PGZX18 light socket for 315W light

Rating:500V 1000W

lead wire: Max250°C

Payment:30%T/T,balance against the copy of B/L,West union,100% irrevocable L/C,Paypal.

Delivery time:7-15 days.

Package: Standard carton packing.

Cautions:

E39 to PGZ18 Adapter Converter for LED/ Halogen / CFL Light Bulb lamp

Changing your PGZ18 base to adapt E39 Screw Fitting.

PGZ18 lamp holder Adaptor converter do not change your electronic data such as 

current,voltage,and power

High temperature resistant

Not easy to be deformed.

The wattage of your ballast MUST match the wattage of the lamp you are using or there 

will be a high risk of fires or equipment damage. Only use the Maxibright ballast that 

comes with this kit for firing up the CDM lamps. Never use a HPS or MH ballast with CDM 

lamps. Connect the mains plug into an electrical outlet socket and switch on. The 

Maxibright CDM ballast will start-up and light the lamp.

Please note: With CDM lamps until they have achieved at least 10 hours of use (from new) 

that they should not be switched off for at least 2 minutes after switch-on. This 

includes testing during the initial installation. If it happens then the light needs to 

be left off for at least 1 hour before switching back on again. Failure to do this will 

damage the lamp and will lead to ignition problems.